JVC DR-MV5S manual Basic Recording VHS, Maximum, Use

30 EN BASIC RECORDING

Basic Recording (VHS)

●Turn on the unit.

●Turn on the TV and select the AV mode.

●Slide the TV/DVD switch to DVD.

1 Load a cassette with the record safety tab intact.

●The unit’s power comes on automatically and the counter is reset to 0:00:00.

					2
STANDBY/ON		VHS	DVD		REC
			VHS/DVD		CH
S-VIDEO	VIDEO	AUDIO
			VHS	DUBBING	DVD
					DV IN
		VHS lamp			3

Press VHS/DVD on the unit repeatedly or VHS on the remote control so that the VHS lamp lights up on the unit.

Press CH +/– or the number buttons to select the channel you wish to record.

Accidental erasure prevention To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab

●If you record the programs received by cable box or DBS receiver ...

1)Select “L-1” by pressing CH +/–.

2)Set the cable box or DBS receiver to the appropriate channel.

4 Press REC MODE repeatedly to set the recording mode.

5 Press 7 on the unit to start recording. Or while holding 7, press 4 on the remote control.

6 Press 9 to pause recording.

●You can select channel during the Record Pause mode.

●To resume recording, press 4.

7 Press 8 to stop recording.

Recording Resume Function

If there is a power outage during recording, Instant Timer Recording (ITR) (
pg. 61) or timer recording (
pg. 31, 32), the recording will resume automatically when power is restored to the unit unless the unit’s memory backup has expired.

Recording Mode

	Maximum
Recording	recording	Use
mode	time
	(approx.)
SP	2 hours	Select when the picture
		quality is important.
		Select when the time is
EP	6 hours	important. You can record 3
		times longer than SP mode.