SUBSIDIARY SETTINGS EN 77
Changing VCR Plus+® Setting
The VCR Plus+ programing system assigns a VCR Plus+ guide channel to the TV channels and the cable channels. These guide channel numbers are also called the VCR Plus+ channel codes. Most TV listings have a section, usually a chart, indicating the guide channel numbers assigned to each station.
Guide Channel Number Set
1 Press SET UP to access the Main Menu screen.
2 Press w e to select “INITIAL SET UP”, then press t.
3 Press w e to select “TUNER | DVD SET UP | FUNCTION SET UP INITIAL SET UP | ||||
SET”, then press t. | TUNER SET | CLOCK SET |
| |||
4 Press rt to select “GUIDE CH |
|
|
|
|
|
|
| BAND |
|
| CATV |
| |
|
|
|
|
|
| |
To ensure that VCR Plus+ timer recording operates correctly, it is necessary to set the “VCR Plus+ Guide Channel” for each station. If you have moved to a different area or if a broadcasting station’s
SET”, then press ENTER.
AUTO CH SET
MANUAL CH SET
GUIDE CH SET
channel number has been changed, perform the following steps to set the correct guide channel number.
SET UP | OK | SELECT WITH [CURSORS] |
EXIT | SELECT | THEN PRESS [ENTER] |
|
NOTES:
● In many instances, the VCR Plus+ guide channel numbers for cable |
and broadcast TV stations DO NOT match the channel number on |
which it is received by your unit or cable box. Check your TV listing, |
or contact your cable supplier for details. |
● Many TV stations can be viewed on cable. Check your TV listing, or |
contact your cable supplier for details. |
● Turn on the unit. |
5 Press rt to select “GUIDE CH”, then press ENTER.
6 Press rt to select the Guide Channel number for the desired station as shown in the TV listings. Then press ENTER.
●To change the Guide Channel number in 10 increments, press and hold rt.
DVD SET UP FUNCTION SET UP | INITIAL SET UP | ||
INITIAL SET UP / GUIDE CH SET |
|
| |
|
|
|
|
| GUIDE CH | 1 |
|
| DVD CH |
|
|
|
| ||
| RETURN |
|
|
|
|
|
|
SET UP | OK | SELECT WITH [CURSORS] |
EXIT | SELECT | THEN PRESS [ENTER] |
|
● Turn on the TV and select the AV mode. |
● Slide the TV/DVD switch to DVD. |
7 Press rt to select “DVD CH”, then press ENTER. Press rt to select the number of the unit’s channel position on which the Guide Channel number’s broadcast is received by the unit or the DBS receiver. Then press ENTER.
●Repeat steps 5 – 7 as necessary.
8 Press SET UP to complete the setting.
Guide Channel Number
“Guide Channel (GUIDE CH) Number” refers to the assigned TV station numbers, according to broadcast area, for the VCR Plus+ timer recording. The Guide Channel Numbers can be found in most TV listings.
ENTER
rtwe
SET UP