MM-012099-001, Rev. B
3.Press the PTT button; when the radio is clear to transmit 
turns ON, 
turns OFF and the channel access tone sounds. Line one shows the called individual's name or LID. The message *INDV* displays on line two.
10.20.2.2 Direct Dial Individual Calls (P5470 Model Only)
1.The following procedure describes how to initiate and complete a Direct Dial Individual Call.
2.The individual call ID is not stored in the
3.Press and hold the PTT button to transmit. 
will turn ON, 
will turn OFF, and the channel access tone will sound. Line one shows the called individual's ID followed by the logical ID number of the unit being called. The message *INDV* displays on line two. Proceed talking into the microphone.
10.20.3Call Storage Lists
There are two lists available for call storage in the P5400 series radios, the calls received list (1 - 10) and the personality list (1 - 99 as defined by the user). When the individual call mode is entered by pressing 
, the calls received list is available. The user can toggle to the personality list by selecting any index other than 0 or toggle between the two lists by pressing the 
key. If wrap is enabled, the calls received list wraps on itself and not into the other list.
Figure 10-15: Calls Received and Personality Lists
The saved call list shows all ten storage locations. If no calls have been received, the saved call list will be empty and the
When in the saved call list, pressing the 
key toggles the time stamp ON and OFF. The time stamp
indicates how long ago the call was received. When in the 
key toggles the Logical IDentification (LID) ON and OFF.
10.21TELEPHONE INTERCONNECT CALLS
10.21.1Receiving a Telephone Interconnect Call
When the radio receives a telephone interconnect call (a call directed only to the user's radio), it
on the assigned working channel and displays 
. The first line displays *PHONE*. The second line displays *INDV*. Proceed with the call. Press the PTT to talk, release the PTT to listen.