Tyco Electronics P5400 manual Select Telephone

MM-012099-001, Rev. B

FEATURE		DISPLAY	PARAMETER		COMMENT
			SETTING
Display Current Home		HOME	N/A		Selects Home Group/Channel
Group/Channel
Select Desired System	SYS SEL		N/A		Selects a new system.
Add Group/Channel to		SCAN ADD	N/A		Adds to Scan List.
Scan List
Delete Group/Channel	SCAN DEL		N/A	Deletes Group or Channel from Scan List.
Add/Delete Scan List	SCAN A/D		N/A	Add or Delete from Scan List.
Select Telephone		PHN CALL	N/A	Trunked Only.
Numbers From Phone List
Data Operation	NO DATA		ON/OFF		Trunked Only. Toggles Data Operation ON/OFF.
Select Individual Call from		IND CALL	N/A	Trunked Only.
IC List
Select Group	GRP SEL		N/A	Trunked Only.
Feature Encryption Display		Menu Item:	N/A		Indicates current features programmed into the radio as well as certain
		FEATURES			information required to add features to the radio. Informational display
					only. No user selectable settings.
System Scan Enable	Menu Item:		ON/OFF		Toggles System Scan feature ON/OFF.
		SYS SCAN
		Once Selected:
		SYSC ON or SYSC
		OFF

Table 10-6: Information Display

RADIO ID	LID in EDACS/EA In CONV it has no
XXXXXXXX		meaning.
RAM SIZ		RAM Size
FLSH SIZ		Flash Size
RF BAND		Frequency Band
PERS VER		Software Version
DSP DATE		Date DSP code was built.
DSP TIME		Time DSP code was built.
DSP FEAT	The DSP Features supported by the
	DSP code, in Hexadecimal.
	Bit mapped (see IPC spec for details):
	•	0x0001 – Conventional
	•	0x0002 – EDACS
	•	0x0010 – AMPF
	•	0x0020 – undefined
DSP VER		DSP Software Version
FLSH VER		FLASH Software
		ex: P54U0102
	P=portable, 54=5400 radio,
	U=unencrypted, 01=major revision (>50
	means unreleased code), 02=minor
	revision
M/A-COM		Copyright
(C) 2007
PERSNLTY		Personality Name
BLD DATE		Date host (ARM) code was built.
BLD TIME		Time host (ARM) code was built.

94