MM-012099-001, Rev. B
METHOD 2: From the keypad: If system selection is programmed as the primary function
of 
and 
select a system by pressing 
or 
to scroll through the system list. The display registers the new system name on line one.
METHOD 3: (P5470 model radios only) Direct Access: Press 
to enter the system select mode. Press the numeric key, which is mapped to the desired system. Press 
. The radio will move to the selected system.
If system selection is programmed to the Voice Group Selection control knob, direct
access to systems will not be available. Pressing 
or 
will scroll through different sets of 16 systems each (banks) if more than 16 systems are programmed into the radio. The systems within each bank are then selectable via the Voice Group Selection control knob as described previously in METHOD 1.
Example: |
|
|
|
System:1 | = North | Group: 1 | = Group 1 |
2 | = South | 2 | = Group 2 |
3 | = East | 3 | = Group 3 |
4 | = West | 4 | = Group 4 |
1.Press 
. (South is the currently selected system.)
2.Press 
. (Press 4 to select “West” system.)
3.Press 
. (West is the newly selected system.)
8.10GROUP/CHANNEL SELECTION
Several methods can be used to select a new group or channel.
METHOD 1: From the Control knob: If group selection is programmed to the Voice Group Selection control knob, select a group by turning the Voice Group Selection control knob to the desired group number position. The display registers the new group name on line two. If the knob is moved to a position greater than the number of programmed groups, the highest programmed group will remain selected. The 
button can be programmed to provide access to a “2nd bank” of 16 group number positions
METHOD 2: From keypad: If group selection is programmed as the primary function of 
and 
select a group by pressing 
or 
to scroll through the group list. The display registers the new group name on line two.
METHOD 3: (P5470 model radios only) Direct Access: Press Press the numeric key mapped to the desired group. the selected group.
to enter the group select mode. Press 
. The radio will move to
8.11MODIFY SCAN LIST
8.11.1P5470 Model
1.Press 
to toggle scan OFF and verify 
is not displayed.
2.Select group or channel.
3.Press 
once to remove group or channel from list.
40