MM-012099-001, Rev. B
3.While the PTT is NOT pressed, the mic will be open and the radio will broadcast an approximately 2 second transmission (e.g., background noise) which will be repeated at
4.Press the PTT to stop the short transmissions.
5.To send a voice message, press the PTT and speak into the microphone.
6.To clear an emergency from the transmitting radio, perform one of the following steps:
•Change systems.
•Change channels (if not prohibited by programming).
•Cycle power by turning radio off and then back on.
•Press the Clear and Emergency buttons simultaneously, providing the Clear Emergency option is enabled in the Supervisory Options in the personality.
10.28.2Receiving an Emergency Group Call
1.Select the desired P25 System and Talk Group/Channel.
2.When the radio detects an incoming Emergency Group Call, the radio will sound an alert tone and “RXEMER” will appear in the display.
3.Voice or emergency transmissions will be heard at the receiving radio.
4.To clear an emergency from the receiving radio, perform one of the following steps:
•Change systems.
•Change channels (if not prohibited by programming).
•Cycle power by turning radio off and then back on.
•Press the Clear and Emergency buttons simultaneously, providing the Clear Emergency option is enabled in the Supervisory Options in the personality.
113