MM-012099-001, Rev. B
Priority 2 groups are already set and a new group is assigned as Priority 1 or Priority 2, the previously assigned group will change to
SCAN DIS The radio is not programmed to scan.
FIXED P1 A Priority 1 group has been
FIXD LST A fixed scan list has been
To quickly view multiple group scan status, press 
then slowly but consistently rotate the group knob. Each group status will appear on the display.
P5470 Model Radio
1.With scan operation turned OFF, select the desired group to add to the selected trunked system group scan list.
2.Press 
. The current priority status of the group will be displayed in column 10 of line three for a
3.While the status is displayed, press 
to add the group to the scan list. 
is displayed on line three.
4.Press 
a second time to set the group to Priority 2. A 
is displayed on line three.
5.Press 
a third time to set the group to Priority 1. A 
is displayed on line three. The priority level selection sequence only advances the group to next higher priority level and stops at priority level 1. To select a lower priority level, the group must be deleted from the scan list and then added back to the scan list. Each new group added to the scan list starts at the lowest priority. If the Priority 1 and Priority 2 groups are already set and a new group is assigned as Priority 1 or Priority 2, the previously assigned group will change to
SCAN DIS The radio is not programmed to scan.
FIXED P1 A Priority 1 group has been
FIXD LST A fixed scan list has been
To quickly view multiple group scan status, press either 
or the 
key. Then slowly but consistently rotate the group knob. Each group status will appear on the display.
49