Dell SCv2080 manual Ddic

Page 11

Figure 3. Installing DDIC in Drawer

1. DDIC

2. Bottom drawer

CAUTION: If the DDIC fails to latch, do not use it and request a replacement from Dell Technical Support Services. If a faulty DDIC unlatches within a closed drawer, it can make the drawer unable to be opened.

3.Close the drawer after inserting the DDICs.

a.Locate the two lock-release buttons situated midway along the runners on each side of the drawer.

b.Press the lock-release buttons inward and use your body to push the drawer toward the chassis until the locks disengage.

c.Place your hands on the front bezel and continue to push the drawer inward until the bezel is flush with the chassis and the front drawer locks engage.

WARNING: Keep fingers clear of the chassis as the drawer is closed.

4.Repeat the previous steps for the top drawer.

11

Image 11
Contents Dell Storage Center Page Before You Begin Safety WarningsPage Storage Center Information ISCSI Fault Domain InformationWorksheet to Record System Information Fibre Channel Zoning Information Additional Storage Center InformationOther Information You May Need Locating Your Service TagUnpacking Storage Center Equipment Installation and ConfigurationSafety Precautions Installation Safety PrecautionsSCv2080 Storage System Components Installing the Storage System in a RackMount the SCv2080 Storage System Chassis Installing the Hard DrivesDdic Cabling SAN-Attached Host Servers Front-End CablingCabling Direct-Attached Host Servers Storage System Connected to Switches and Host ServersStorage System Connected Directly to Host Servers Cabling the Ethernet Management NetworkBack-End Cabling Interconnecting Two Storage ControllersInterconnected Storage Controllers Cabling an Expansion Enclosure to a Storage SystemConnecting the Power Cables Turning on the Storage System Power CablesNOM Information Mexico Only Technical SpecificationsInstalling and Using the Dell Storage Client Page Ddic