Dell SCv2080 manual

Storage Controllers

Storage controllers	Two hot-swappable storage controllers with the following IO options:
	• Two 16 Gbps Fibre Channel ports
	• Four 8 Gbps Fibre Channel ports
	• Two 10 Gbps iSCSI ports
	• Four 1 Gbps iSCSI ports
	• Four 12 Gbps SAS ports
Storage Connectivity
Configurations	Storage Center supports up to 168 drives on a single redundant-path SAS
	chain
	An SCv2080 storage system supports one SC180 expansion enclosure
Redundant Array of Independent Disks (RAID)
Controller	Two hot-swappable storage controllers
Management	RAID management using Dell Storage Client 2015 R1
Back-Panel Ports Connectors (per Storage Controller)
Fibre Channel, iSCSI, or	Connection to a Fiber Channel fabric, iSCSI network, or a direct connection
SAS connectors	to servers with SAS HBAs
Ethernet connectors	MGMT: 10 Mbps, 100 Mbps, or 1 Gbps embedded Ethernet port used for
	Storage Center management

REPL: 10 Mbps, 100 Mbps, or 1 Gbps embedded iSCSI port used for replication to another Storage Center

SAS connectors

USB Connector

Serial connector

6 Gbps SAS connectors for SAS port redundancy and an additional expansion enclosure

NOTE: SAS connectors are SFF-8086/SFF-8088 compliant.

One USB 3.0 connector used for Storage Center updates

NOTE: Not for customer use.

LED Indicators

Front panel	• One two-digit LCD indicator for Unit ID, error code, and unit location
	identifier
	• One two-color LED indicator for power status
	• One single-color LED indicator for module fault status (enclosure as a
	whole)
	• One single-color LED indicator for logical fault status (drive, HBA, RAID
	controller, and so on)
	• One single-color LED indicator for drawer 1 fault status

20