NOTE: Before turning on the host servers, make sure that the status indicator on the front of the storage system is green.
4.Turn on the host servers that are connected to the storage system.
Installing and Using the Dell Storage Client
The Dell Storage Client configures, manages, and monitors an SCv2080 storage system.
1.Go to support.dell.com and download the Dell Enterprise Manager software.
2.Install the Enterprise Manager Client on a host server.
NOTE: To discover and configure a Storage Center, the software must be installed on a host server that is located on the same subnet as the storage system
3.Start the software by
•To discover and configure an uninitialized SCv2080 storage system, click the Discover and Configure Uninitialized SCv2000 Series Storage Centers link and follow the steps in the wizard.
•To connect to an initialized SCv2080 storage system, click the Log in to a Storage Center or Data Collector link.
•To set up the host server to access Storage Center and configure Best Practices for performing IO, click the Setup this host to access a Storage Center link and follow the steps in the wizard.
NOTE: For more information about installing the Dell Storage Client, configuring a storage system, and performing
Deployment Guide.
NOM Information (Mexico Only)
The following information is provided on the device described in this document in compliance with the requirements of the official Mexican standards (NOM):
Importer: | Dell Inc. de México, S.A. de C.V |
| |
| Paseo de la Reforma |
| Col. Lomas Atlas |
| 11950 México, D.F. |
Model number: | E11J |
Supply voltage: | |
Frequency: | 50/60 Hz |
Current consumption: | 16 A |
Technical Specifications
The technical specifications of the SCv2080 storage system are displayed in the following tables.
Drives
SAS hard drives | Up to 84 |
19