Additional Storage Center Information

IPv4 address for storage controller module 1: port 1	___ . ___ . ___ . ___
IPv4 address for storage controller module 2: port 1	___ . ___ . ___ . ___
(Four port I/O card only) IPv4 address for storage controller module 1:	___ . ___ . ___ . ___
port 3
(Four port I/O card only) IPv4 address for storage controller module 2:	___ . ___ . ___ . ___
port 3
Table 4. iSCSI Fault Domain 2
Target IPv4 address	___ . ___ . ___ . ___
Subnet mask	___ . ___ . ___ . ___
Gateway IPv4 address	___ . ___ . ___ . ___
IPv4 address for storage controller module 1: port 2	___ . ___ . ___ . ___
IPv4 address for storage controller module 2: port 2	___ . ___ . ___ . ___
(Four port I/O card only) IPv4 address for storage controller module 1:	___ . ___ . ___ . ___
port 4
(Four port I/O card only) IPv4 address for storage controller module 2:	___ . ___ . ___ . ___
port 4

The Network Time Protocol (NTP) and Simple Mail Transfer Protocol (SMTP) server information is optional. The proxy server information is also optional, but it may be required to complete the Discover and Configure Uninitialized SCv2000 Series Storage Centers wizard.

Table 5. NTP, SMTP, and Proxy Servers
NTP server IPv4 address	___ . ___ . ___ . ___
SMTP server IPv4 address	___ . ___ . ___ . ___
Backup SMTP server IPv4 address	___ . ___ . ___ . ___
SMTP server login ID	________________
SMTP server password	________________
Proxy server IPv4 address	___ . ___ . ___ . ___

Fibre Channel Zoning Information

For a storage system with Fibre Channel front-end ports, record the physical and virtual WWNs of the Fibre Channel ports in Fault Domain 1 and Fault Domain 2. This information is displayed on the Review Front-End page of the Discover and Configure Uninitialized SCv2000 Series Storage Centers wizard. Use this information to configure zoning on each Fibre Channel switch.

See the Dell Storage Center SCv2080 Storage System Deployment Guide for information about setting up Fibre Channel zoning.