Worksheet to Record System Information

Use the following worksheet to record the information that is needed to install the SCv2080 storage system.

Storage Center Information

Gather and record the following information about the Storage Center network and the administrator user.

Table 1. Storage Center Network
Service Tag	________________
Management IPv4 address (Storage Center management address)	___ . ___ . ___ . ___
Left Controller IPv4 address (Controller 1 MGMT port)	___ . ___ . ___ . ___
Right Controller IPv4 address (Controller 2 MGMT port)	___ . ___ . ___ . ___
Subnet mask	___ . ___ . ___ . ___
Gateway IPv4 address	___ . ___ . ___ . ___
Domain name	________________
DNS server address	___ . ___ . ___ . ___
Secondary DNS server address	___ . ___ . ___ . ___
Table 2. Storage Center Administrator
Password for the default Storage Center “Admin” user	________________
Email address of the default Storage Center “Admin” user	________________

iSCSI Fault Domain Information

For a storage system with iSCSI front-end ports, gather and record network information for the iSCSI fault domains. This information is needed to complete the Discover and Configure Uninitialized SCv2000 Series Storage Centers wizard.

NOTE: For a storage system deployed with two Ethernet switches, Dell recommends setting up each fault domain on separate subnets.

See the Dell Storage Center SCv2080 Storage System Deployment Guide for information about setting up iSCSI fault domains.

Table 3. iSCSI Fault Domain 1
Target IPv4 address	___ . ___ . ___ . ___
Subnet mask	___ . ___ . ___ . ___
Gateway IPv4 address	___ . ___ . ___ . ___