Wagner SprayTech 9140S, 9146, 9150, 9170, 9190 owner manual GX-08, Minutes

Page 16

Cleanup - Cleaning the Suction Set

1. Lock the gun and turn the pump OFF (O).

GX-05GX-07

O

GX-08

2.Remove the suction hose and return tube and clean it using the appropriate cleaning solution. You should also wipe the threads of the inlet nut (a) and remove and clean the inlet filter of the suction tube.

(a)

3.When suction set is clean, thread the suction tube back into the inlet valve, and replace the return tube onto the return tube fitting. Replace clip.

4.Submerge the suction set into a bucket of NEW cleaning solution.

5.Turn the PRIME/SPRAY knob to PRIME. Turn the pump ON (l), and trigger the gun once into a waste container to relieve pressure.

6.Let the pump circlulate cleaning solution through the suction set for 2-3 minutes. Turn the pump OFF.

SPRAY

PRIME

l

2 to 3

minutes

IMPORTANT!

If you used oil-based materials, you must flush the pump again using water to prepare it for storage. Repeat #1 - #11 in Cleanup- Latex materials, instructions.

Move on to Cleaning the Spray Gun Components.

English

16

Image 16

Contents Models 9140S, 9146, 9150, 9170 Hazard Explosion Hazard DUE to Incompatible Materials Grounding Instructions Important Electrical InformationCord gauge Maximum cord length Specifications Components and DescriptionComponents Controls and FunctionsPump cleaning adapter can be clipped to the spray hose port Tools needed for assembly AssemblyDo not plug in the sprayer until setup is complete Pressure Relief Procedure Locking the Spray GunPlugging in the Sprayer GX-05GX-07Purging and Priming the Sprayer Spray hose Purging and Priming the Spray HoseKeep hands clear from fluid stream Practice / Spraying Technique GX-05 / GX-07 GX-08 Spraying Troubleshooting Unclogging the Spray TipGX-05 / GX-07 Spray gun model GX-07 Spraying Troubleshooting Cleaning the Inlet FilterSpray gun models GX-05 and GX-08 Important Cleaning Notes Cleanup Latex materialsLeave pump running through steps 7 Containers shouldBe touching Keep holding trigger through next stepsCleanup Oil-based materials Minutes Cleanup Cleaning the Spray Gun Components Short-Term Storage up to 16 hours ShutdownStartup GX-05 GX-07 GX-08Long-Term Storage Separating oilCleaning the Inlet Valve Disassembly of the Fluid Section Fluid Section Seal Replacement InstructionsAssembly of the Fluid Section Daily Maintenance Troubleshooting / MaintenanceExtended Maintenance Parts List Liste de pièces Lista de piezas Modèle du pistolet GX-08 Modelo de pistola GX-08Article N de pièce Description Quantité ArticuloSuction set Juego de succiónDispositif d’aspiration Article Pieza# Descripción CantidadEspañol Articulo Pieza# Descripción Cantidad Description Quantity Article De pièce QuantitéArticulo Pieza# Descripción Cantidad Accessories Accessoires Accesorios De pièce DescriptionWarranty Garantié Garantia Wagner Spray Tech