Wagner SprayTech 9150, 9170, 9146, 9190 owner manual Cleanup Cleaning the Spray Gun Components

Cleanup - Cleaning the Spray Gun Components

1.Make sure the pump is switched OFF (O). Make sure the PRIME/SPRAY knob is turned to PRIME. Unplug the sprayer.

SPRAY PRIME

2.Remove spray gun from the paint hose using adjustable wrenches.

3.Remove filter from spray gun (refer to Cleaning the Spray Gun Filter, page 12).

GX-07	GX-05
	GX-08

4.Remove spray tip (a) from spray guard assembly. Clean spray tip with a soft-bristled brush and the appropriate cleaning solution. Be sure to remove and clean the washer (b) and saddle seat (c) located in the rear of the spray tip assembly.

(b)

(c)

(a)

5. Install gun filter tapered-end first. Reassemble spray gun.

GX-07	GX-05
	GX-08

6.Install spray tip (a), saddle seat (c) and washer (b), and replace spray guard assembly.

(b)

(c)

(a)

7.Thread the spray gun back onto the paint hose. Tighten with a wrench.

17 English