Wagner SprayTech 9190 Short-Term Storage up to 16 hours, Shutdown, Startup, GX-05 GX-07 GX-08

Page 18

Short-Term Storage (up to 16 hours)

Follow these steps when using latex materials only. If using materials that are oil-based, follow the Cleanup - Oil-based materials and Long-Term Storage steps.

Shutdown

1. Lock the spray gun off.

GX-05

GX-07

GX-08

2.Turn the PRIME/SPRAY knob to PRIME. Switch the pump OFF (O). Unplug the sprayer.

O

SPRAY

PRIME

3.Pour 1/2 cup water slowly on the top of the paint to prevent the paint from drying. Wrap the spray gun assembly in a damp cloth and place it in a plastic bag. Seal the bag shut. Place the sprayer in a safe place out of the sun for short-term storage.

Startup

1.Remove the gun from the plastic bag. Stir the water into the paint.

2.Turn the PRIME/SPRAY knob to PRIME. Plug sprayer in. Turn the switch to ON (I).

SPRAY

PRIME

l

3.Turn the PRIME/SPRAY knob to SPRAY. Test the sprayer on a practice piece and resume spraying.

English	18

Image 18

Contents Models 9140S, 9146, 9150, 9170 Hazard Explosion Hazard DUE to Incompatible Materials Important Electrical Information Grounding InstructionsCord gauge Maximum cord length Components SpecificationsComponents and Description Controls and FunctionsPump cleaning adapter can be clipped to the spray hose port Assembly Tools needed for assemblyDo not plug in the sprayer until setup is complete Plugging in the Sprayer Pressure Relief ProcedureLocking the Spray Gun GX-05GX-07Purging and Priming the Sprayer Purging and Priming the Spray Hose Spray hoseKeep hands clear from fluid stream Practice / Spraying Technique Spraying Troubleshooting Unclogging the Spray Tip GX-05 / GX-07 GX-08GX-05 / GX-07 Spraying Troubleshooting Cleaning the Inlet Filter Spray gun model GX-07Spray gun models GX-05 and GX-08 Important Cleaning Notes Cleanup Latex materialsBe touching Leave pump running through steps 7Containers should Keep holding trigger through next stepsCleanup Oil-based materials Minutes Cleanup Cleaning the Spray Gun Components Startup Short-Term Storage up to 16 hoursShutdown GX-05 GX-07 GX-08Long-Term Storage Separating oilCleaning the Inlet Valve Fluid Section Seal Replacement Instructions Disassembly of the Fluid SectionAssembly of the Fluid Section Troubleshooting / Maintenance Daily MaintenanceExtended Maintenance Parts List Liste de pièces Lista de piezas Article N de pièce Description Quantité Modèle du pistolet GX-08Modelo de pistola GX-08 ArticuloDispositif d’aspiration Suction setJuego de succión Article Pieza# Descripción CantidadDescription Quantity Article De pièce Quantité Español Articulo Pieza# Descripción CantidadArticulo Pieza# Descripción Cantidad Accessories Accessoires Accesorios De pièce DescriptionWarranty Garantié Garantia Wagner Spray Tech