OPTIONAL ACCESSORIES
AND COMPATIBLE EQUIPMENT
Factory Installed
Electrical Holder and Cable Assembly
Work Cable and Clamp
Strap Packet
Instruction Manual
Field Installed
K870 - Foot Amptroltm for TIG welding. When the V160-Sʼs Output Control is in the “REMOTE” position, the foot Amptrol energizes the output and controls the output remotely. The Foot Amptrol connects directly to the 6 pin Amphenol.
K963-3 - Hand Amptroltm for TIG welding. When the V160-Sʼs Output Control is in the “Remote” position, the hand Amptrol energizes the output and controls the output remotely. The Hand Amptrol connects directly to the 6 pin Amphenol.
PTA-17V TIG Torch - 150 Amp air-cooled compact and durable Tig Torch with integral gas valve for gas control at the torch. The following 1-piece cable torches can be used with a K960-1 adapter:
•K1782-6 (12.50 Ft.) 1-Piece Cable
•K1782-8 (25.0 Ft.) 1-Piece Cable
PTA-9FV TIG Torch - Gas Valve flexible head torch:
• K1781-7 (25.0 Ft.) 1-Piece Cable
PTA-17FV TIG Torch - Gas Valve flexible head torch:
• K1782-11 (25.0 Ft.) 1-Piece Cable
K960-1-TIG Torch Adapter - for connection of PTA- 17V torches (1-piece cable) to power sources without gas passing through the Twist Mate connection.
NOTE: Any remote control with trigger-only circuit, such as the K814 Arc Start Switch, will not be sensed by the V160-S remote control connection, and there- fore will not allow control of the output.
CABLE PLUGS
K852-50 - Cable Plug Kit for #1-#2 cable. Attaches to welding cable to provide quick disconnect from machine.
TIG Torch Parts Kits - Parts kits are available for the PTA-17 TIG torch. This kit includes back cap, collets, collet bodies, nozzles and tungstens.
Order KP508 for PTA-17 torches
See publication E12.150 for parts kits breakdown. Cut Length Consumables - TIG welding filler metals are available for welding stainless steel, mild steel, aluminum and copper alloys. See publication C9.10.
