Craftsman 919.724321 owner manual Specification Chart, Safety Guidelines Definitions

Page 3

SPECIFICATION CHART

Model No.

919-724321

Running HP

-----

Bore

2.375"

Stroke

1.35"

Voltage-Single Phase

120

Minimum Branch Circuit Requirement

15 amps

Fuse Type

Time Delay

Air Tank Capacity

30

Approx. Cut-In

120

Approx. Cut-out

150

SCFM @ 40 psig

7.8

SCFM @ 90 psig

5.5

Refer to Glossary for abbreviations.

SAFETY GUIDELINES - DEFINITIONS

This manual contains information that is important for you to know and under- stand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols below. Please read the manual and pay attention to these symbols.

Indicates an imminent-

Indicates a potentially

ly hazardous situation

hazardous situation

which, if not avoided, will result in death

which, if not avoided, may result in minor

or serious injury.

or moderate injury.

 

 

Indicates a potentially

Used without the

hazardous situation

safety alert symbol

which, if not avoided, could result in

indicates a potentially hazardous situation

death or serious injury.

which, if not avoided, may result in

 

property damage.

 

 

IMPORTANT SAFETY INSTRUCTIONS

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemi-

cals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some example of these chemicals are:

lead from lead-based paints

crystalline silica from bricks and cement and other masonry products

arsenic and chromium from chemically-treated lumber

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, always wear MSHA/NIOSH approved, properly fitting face mask or respirator when using such tools.

When using air tools, basic safety precautions should always be followed to reduce the risk of of personal injury.

3- ENG

A14411

Image 3
Contents Sold by Sears Canada, Inc. Toronto, Ont. M5B 2B8 AIR CompressorTable of Contents Specification Chart Safety Guidelines DefinitionsImportant Safety Instructions Always remain in attendance with What Could HappenAttachments & Accessories Personnel can result in serious injury Safety equipment must be properlyElectricity. Like any other electrically Repairs attempted by unqualifiedHazard Warning Risk from Moving Parts Result in serious burns How To Prevent ItEquip area of operation with a fire extinguisher Keep children away from the air compressor at all timesDuty Cycle AccessoriesAccessories GlossaryAssemble Wheels AssemblyContents of Carton Tools Required for AssemblyInstallation Location of the Air CompressorIllustration Voltage and Circuit Protection Extension CordsTank Pressure Gauge The tank OperationKnow Your Air Compressor Description of OperationBefore Starting How to StopBefore Each Start-Up How to StartTo Drain Tank MaintenanceTo Check Safety Valve Customer ResponsibilitiesAir Filter Air Filter Inspection and ReplacementAir Compressor Pump Intake and Exhaust Valves MotorTube Service and AdjustmentsTo Replace or Clean Check Valve Outlet Tube Nut Pressure ReliefRegulator Arrow To Replace RegulatorRegulator Quick Connect NippleStorage Troubleshooting Pressure reading Check wiring connection Pleine Garantie D’UN AN Table DES MatièresTableau DES Spécifications Mesures DE Sécurité DéfinitionsConsignes DE Sécurité Importantes Avertissement Risque dexplosion ou dincendie Prévention Conserver ces directivesAvertissement Risque déclatement Risque PréventionAvertissement Risque de projection dobjets Avertissement Risque par inhalation Avertissement Risque de choc électriqueAvertissement Risque de brûlures Avertissement Risque relié aux pièces mobilesAvertissement Risque de chute Prévention Avertissement Risque dune utilisation dangereuse RisqueLexique AccessoiresCycle DE Service AccessoiresDéballage AssemblageContenu de lemballage en carton Assemblage des Outils requis pour lassemblageTerre inappropriée peut entraîner des chocs électriques LillustrationRallonges Protection contre la surtension et protection du circuitRisque dune utilisation Utilisation Familiarisez-vous avec votre compresseur dairDescription du fonctionnement Soupape de décharge de pression La Utilisation de lappareilArrêt de lappareil Avant le démarrageMise en marche Avant chaque mise en marcheVidange du réservoir EntretienResponsabilités du client Vérification de la soupape de sûretéFiltre à air Inspection et remplacement MoteurRisque de brûlures Entretien ET Réglages Remplacement ou nettoyage de la soupape de retenueRemplacement du régulateur Rangement Peut éclater ou exploser DépannageSerrer Risque déclatement.NeUne légère chute de pression est Pas Surcharges déclenché 54- FR 55- FR A14411 MY-HOME Sears Parts and Repair CenterCanada