5.Run the compressor for 15 min- utes. Make sure the drain valve is open and there is minimal air pressure
6.After 15 minutes, close the drain valve (clockwise). The air receiver will fill to
The compressor is now ready for use.
Before Each Start-Up:
1.Place On/Auto/Off lever to "OFF".
2.Pull regulator knob out, turn
3.Attach hose and accessories. NOTE: The hose or accessory will require a quick connect plug if the air outlet is equipped with a quick connect.
Risk of Bursting. Too much air
pressure causes a hazardous risk of bursting. Check the manufactur- er’s maximum pressure rating for air tools and accessories. The reg- ulator outlet pressure must never exceed the maximum pressure rating.
How to Start:
1.Turn the On/Auto/Off lever to "AUTO" and allow tank pressure to build. Motor will stop when tank pressure reaches
2.Pull the regulator knob out and turn clockwise to increase pres- sure. When the desired pressure is reached push knob in to lock in place. The compressor is ready for use.
NOTE: Always operate the air com- pressor in
D28071 | 14- ENG |