Studer Innotec HPC 2800-12, HPC 4400-24, HPC 6000-48, HPC 8000-48 manual Technical Data

Page 26

STUDER INNOTEC

HP-COMPACT

8 Technical Data

HP-COMPACT V5.4

28/80

Image 26

Contents Sine wave Inverter, Battery charger, Transfersystem HP-COMPACT HPCHP-COMPACT General Information Quality and WarrantyWarranty Disclaimer Operating instructionsSpecial precautions Liability DisclaimerPrinciple schematic IntroductionDescription of the main functions Battery connecting Fixing Mounting and installingInstallation place ConnectionsPre-installation settings CablingConnection to battery 3.6.1.1 On the appliance side Connection to the 230Vac-consumer appliances AC Output Connection to Remote controlConnection to Temperature Sensor Temp Connection to the 230Vac Input AC InputControl Display and control parametersLight Emitting Diodes LED LEDInverter Push buttonsTurning Knobs Charge detection system „StandbyBattery Condition Overheating Over TempCycle of charge Battery chargerDefault values for battery voltage thresholds Equalization chargingCharging current Input current repartition Power sharingSet the Input Limit Transfer system Multifunctional Contact Fast UPS- Mode for the Transfer SwitchDelayed mode of the Transfer System Set the transfer voltage thresholdRemote Control RCC-01 HP-COMPACTProgramming Remote control for „Power Sharing RPS-01Standard setting Set the voltage and timing threshold Reset value default settingsBattery voltages and absorption time Principle Auxiliary contactTable of voltage and timing threshold Programming of the Auxiliary ContactPower cut of the second priority loads Manual operating of Auxiliary ContactDisabling some of the HP-COMPACT functions Installation MaintenanceDiagram of the different modes Declaration of CE ComplianceTechnical Data