Hitachi SJ2002 manual Func Default Set Name / Description Value Code

Func.		Default	Set
	Name / Description	Value
Code			Value
		–FE(F)/–FU
A003/	Base frequency setting	50.0 / 60.0
A203
A004/	Maximum frequency setting	50.0 / 60.0
A204
A005	[AT] selection	00
	• 00 Select between [O] and [OI] at [AT]
	• 01 [O]+[OI] ([AT] input is ignored)
	• 02 Select between [O] and keypad pot
	• 03 Select between [OI] and keypad pot
A011	Pot./O–L input active range start frequency	0.0
A012	Pot./O–L input active range end frequency	0.0
A013	Pot./O–L input active range start voltage	0.
A014	Pot./O–L input active range end voltage	100.
A015	Pot./O–L input start frequency enable	01
	• 00 Use A011 starting value)
	• 01 Use 0 Hz
A016	External frequency filter time constant	1. / 17.
A020/	Multi-speed frequency setting	0
A220
A021	Multi-speed frequency settings (for both motors)	0.0 / 0.0
A022		0.0 / 0.0
A023		0.0 / 0.0
A024		0.0 / 0.0
A025		0.0 / 0.0
A026		0.0 / 0.0
A027..		......
..A035		0.0 / 0.0
A038	Jog frequency setting	1.00
A039	Jog stop mode	00
	• 00 Free-run stop, jogging disabled during
	motor run
	• 01 Controlled deceleration, jogging disabled
	during motor run
	• 02 DC braking to stop, jogging disabled
	during motor run
A042/	Manual torque boost value	5.0(A042)/
A242		0.0 (A242)
A043/	Manual torque boost frequency adjustment	3.0/(A043)
A243		0.0(A243)
A044/	V/f characteristic curve selection	02
A244	• 00 V/f constant torque
	• 01 V/f variable torque
	• 02 Intelligent sensorless vector control

19