Hitachi SJ2002 manual Gain setting

Func.				Default	Set
		Name / Description		Value
Code					Value
				–FE(F)/–FU
A045/	V/f gain setting			100.
A245
A046/	Automatic torque boost voltage gain			100
A246
A047/	Automatic torque boost slip gain			100
A247
A051	DC braking enable			00
	• 00 Disable		• 01 Enable
A052	DC braking frequency setting			0.5
A053	DC braking wait time			0.0
A054	DC braking force during deceleration			0.
A055	DC braking time for deceleration			0.0
A056	DC braking / edge or level detection for [DB]			01
	input
A061/	Frequency upper limit setting			0.0
A261
A062/	Frequency lower limit setting			0.0
A262
A063	Jump (center) frequency setting			0.0
A065
A067
A064	Jump (hysteresis) frequency width setting			0.5
A066
A068
A071	PID Enable			00
	• 00 PID operation OFF
	• 01 PID operation ON
A072	PID proportional gain			1.0
A073	PID integral time constant			1.0
A074	PID derivative time constant			0.0
A075	PV scale conversion			1.00
A076	PV source setting			00
	•	00 [OI] terminal (current input)
	•	01 [O] terminal (voltage input)
	• 02 ModBus network
	•	03 Calculate function output
A077	Reverse PID action			00
	• 00 PID input = SP – PV
	• 01 PID input = –(SP – PV)
A078	PID output limit			0.0

20