Hitachi SJ2002 manual E60, Error Trip Conditions

Error	Name	Probable Cause(s)
Code
E35	Thermistor	• Thermistor input, [THM] and [L], is
		over the temp. threshold
E60	Communications error	• The inverter’s watchdog timer for the
		communications network has timed out.
---	Under-voltage (brownout)	• Low input voltage caused the inverter
	with output shutoff	to turn OFF the motor output and try to
		restart. If unsuccessful, a trip occurs.

Error Trip Conditions

Use function code D081 to access the error trip conditions for the current error as shown in the table below. Use the Up and Down arrow keys to scroll through the trip condition parameters.

	Step	Display
1.	Access D081	d081
2.	Press Function Key	If no error:
		_ _ _
		If error exists:
		EXX
		(error code)
3.	Press Up/Dn key (if	Output frequency at trip point:
error exists)		10.0

Motor current at trip point:

12.5

DC bus voltage at trip point:

284.0

2Cumulative Run time house at trip point:

15

Cumulation power-ON hours at trip point:

18

14