Hitachi SJ2002 manual AVR voltage select

Func.			Default	Set
	Name / Description		Value
Code				Value
			–FE(F)/–FU
A081	AVR function select		00
	• 00 AVR enabled	• 01 AVR disabled
	• 02 AVR enabled except during decel
A082	AVR voltage select		230 / 230
			400 / 460
A092/	Acceleration (2) time setting		15.0
A292
A093/	Deceleration (2) time setting		15.0
A293
A094/	Select method to switch to Acc2/Dec2 profile		00
A294	• 00 2CH input from terminal
	• 01 transition frequency
A095/	Acc1 to Acc2 frequency transition point		0.0
A295
A096/	Dec1 to Dec2 frequency transition point		0.0
A296
A097	Acceleration curve selection		00
	• 00 Linear	• 01 S-curve
A098	Deceleration curve selection		00
	• 00 Linear	• 01 S-curve
A101	[OI]–[L] input active range start frequency		0.0
A102	[OI]–[L] input active range end frequency		0.0
A103	[OI]–[L] input active range start current		0.0
A104	[OI]–[L] input active range end current		100.
A105	[OI]–[L] input start frequency enable		01
A141	A input select for calculate function		02
	• 00 Digital operator
	• 01 Keypad potentiometer
	• 02 [O] input
	• 03 [OI] input
	• 04 Network variable
A142	B input select for calculate function		03
	• 00 Digital operator
	• 01 Keypad potentiometer
	• 02 [O] input
	• 03 [OI] input
	• 04 Network variable
A143	Calculation symbol		00
	• 00 ADD (A input + B input)
	• 01 SUB (A input – B input)
	• 02 MUL (A input x B input)
A145	ADD frequency		0.0

21