Hitachi SJ2002 manual C082 OI input span calibration

Func.				Default	Set
	Name / Description			Value
Code					Value
				–FE(F)/–FU
C076	Communication error select			02
	• 00 Trip (error code E60)
	• 01 Decelerate to stop and trip (error code E60)
	• 02 Disable
	• 03 Free run stop (coasting)
	• 04 Decelerate to a stop
C077	Communication error time-out			0.00
C078	Communication wait time			0.
C081	O input span calibration			100.0
C082	OI input span calibration			100.0
C085	Thermistor input tuning			100.0
C086	[AM] terminal offset tuning			0.0
C091	Debug mode enable			00
	• 00 Display	• 01 No display
C101	Up/Down memory mode selection			00
	• 00 Clear last frequency (return to default
	frequency F001)
	• 01 Keep last frequency adjusted by UP/DWN
C102	Reset selection			00
	• 00 Cancel trip state at input signal ON transi-
	tion, stops inverter if in Run Mode
	• 01 Cancel trip state at signal OFF transition,
	stops inverter if in Run Mode
	• 02 Cancel trip state at input signal ON transi-
	tion, no effect if in Run Mode
C141	Input A select for logic		Nine option codes	00
	output		available
			(LOG excluded),
C142	Input B select for logic			01
			see page 29
	output
C143	Logic function select			00
	• 00 [LOG] = A AND B
	• 01 [LOG] = A OR B
	• 02 [LOG] = A XOR B
C144	Terminal [11] ON delay			0.0
C145	Terminal [11] OFF delay			0.0
C146	Terminal [12] ON delay			0.0
C147	Terminal [12] OFF delay			0.0
C148	Output relay ON delay			0.0
C149	Output relay OFF delay			0.0

26