Omega Vehicle Security HHP-2000 Series Range Lock, Advanced Functions, Logging on Demand

NOTE: To reset MAX/MIN recorder function switch the instrument off.

NOTE: Some functions may be inhibited while information is stored in either Auto, Manual or Max/Min modes. This is to prevent inadvertent parameter mixing whilst in any of the above modes. To re-activate these functions please delete any stored information by following the “Output of data” section.

RANGE LOCK

This instrument has a Range Lock feature that displays readings to the best resolution, shown by A/R on the display. This can be turned off by pressing the A/R key. The display will then use the same display resolution for the entire pressure range. This is useful to stop the display switching between resolutions where there are fluctuations in pressure. To cancel this mode, press the A/R key again.

ADVANCED FUNCTIONS

The following additional functions apply to models HHP-2080, 2081, 2082, 2083, 2084, 2085

LOGGING

These models have functions that enable the user to store and retrieve up to 250 readings and output such to a PC or Epson compatible printer via Omega’s infrared HHP-2000DL. Omega also offers MLWIN, a customised Windows™ software package.

Note: Some functions may be inhibited while information is stored in either Auto, Manual or Max/Min modes. This is to prevent inadvertent parameter mixing whilst in any of the above modes.

To re-activate these functions please delete any stores information by following the "Output of data" section.

SETTING INTERNAL CLOCK

Press decimal point (•) key and the and NE symbols will appear on display with the current year and month settings (YYMM).

Key in new year and month if desired and press key to accept. Display will show current date of month setting (DD). Key in new value if desired and press key to accept.

Display will show current hours and minutes setting (24 hour clock). Key in new values if desired and press key to accept. Instrument will then return to normal mode.

LOGGING ON DEMAND

This function allows readings to be stored as and when required. A maximum of 50 readings can be stored this way.

When ready to store a reading press key. , NE symbols and 0 will appear on the display. It is possible to enter up to a four digit reference number including decimal point. Press key to enter and store reading, time, date and reference number.

Instrument will return to standard mode, however symbol will remain on display until data is erased.

PRESET INTERVAL LOGGING

This function allows readings to be taken automatically at a preset time interval.

NOTE: If data is already stored, as signified by the or symbols appearing on display, this function will not operate.