Quantaray N52FN, N62FN manual AIR Supply and Connections

Page 5

AIR SUPPLY AND CONNECTIONS

Do not use oxygen, combustible gases, or bottled gases as a power source for this tool as tool may explode, possibly causing injury.

FITTINGS:

Install a male plug on the tool which is free flowing and which will release air pressure from the tool when disconnected from the supply source.

HOSES:

Air hoses should have a minimum of 150 p.s.i. (10.6 kg/cm2) working pressure rating or 150 percent of the maximum pressure that could be produced in the air system. The supply hose should contain a fitting that will provide “quick disconnecting” from the male plug on the tool.

SUPPLY SOURCE:

Use only clean regulated compressed air as a power source for this tool. NEVER USE OXYGEN,

COMBUSTIBLE GASES, OR BOTTLED GASES, AS A POWER SOURCE FOR THIS TOOL AS TOOL MAY EXPLODE.

REGULATOR:

A pressure regulator with an operating pressure of 0 - 125 p.s.i. (0 - 8.79 KG/CM2) is required to control the operatiing pressure for safe operation of this tool. Do not connect this tool to air pressure which can potentially exceed 200 p.s.i. (14 KG/CM2)as tool may fracture or burst, possibly causing injury.

OPERATING PRESSURE:

Do not exceed recommended maximum operating pressure as tool wear will be greatly increased. The air supply must be capable of maintaining the operating pressure at the tool. Pressure drops in the air supply can reduce the tool’s driving power. Refer to “TOOL SPECIFICATIONS” for setting the correct operating pressure for the tool.

FILTER:

Dirt and water in the air supply are major causes of wear in pneumatic tools. A filter will help to get the best performance and minimum wear from the tool. The filter must have adequate flow capacity for the specific installation. The filter has to be kept clean to be effective in providing clean compressed air to the tool. Consult the manufacturer’s instructions on proper maintenance of your filter. A dirty and clogged filter will cause a pressure drop which will reduce the tool’s performance.

-5-

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Industrial OIL Free Angled Finish Nailers N52FN/N62FNIndex IntroductionAIR Supply and Connections Safety InstructionsLoading Tool OperationN52FN/N62FN Tool Specifications AIR Supply and Connections To Prevent Accidental Injuries Adjusting the MULTI-DIRECTIONAL ExhaustLoading the N52FN/N62FN Trigger Operation Tool OperationContact Trip Operation Sequential Trip OperationTrigger Operated Tool Tool Operation CheckTool Must not Cycle Tool Must CycleMaintaining the Pneumatic Tool Replacement PartsAIR SUPPLY-PRESSURE and Volume Problem Cause Correction Trouble ShootingJAM Release DIAL-A-DEPTH Fastener Control AdjustmentTo Adjust DIAL-A Depthtm Fastener Control Adjustment Accessories Available Page Nota IntroducciónÍndice Suministro DE Aire Y Conexiones Instrucciones DE SeguridadAL Cargar LA Herramienta OperaciónEspecificaciones DEL Sujetador Especificaciones DE LAS N52FN/N62FNConexión DE Aire DE LA Herramienta Presión DE OperaciónMangueras ConexionesFuente DE Suministro ReguladorDeflector Direccional DE LA Salida Carga DE LAS Herramientas N52FN/N62FNAdvertencia Para Impedir Lesiones Accidentales Carga DE LOS ClavosAntes DE Manejar U Operar Esta Herramienta Operación DE LA HerramientaOperación DE Disp ARO POR Contacto Operación DE Disp ARO SecuencialHerramienta Operada POR Gatillo Verificación DE LA Operación DE LA HerramientaOperación POR Disp ARO Secuencial LA Herramienta no Debe Efectuar SU CicloPartes DE Reemplazo Presión Y Volumen DEL Suministro DE AireMantenimiento DE LA Herramienta Neumática Diagnóstico DE Falla ProblemaRemueva EL Sujetador Atascado Ajuste DEL Control DE Fondo DEL Sujetador DIAL-A-DEPTHPara Ajustar EL Control DE Fondo DEL Sujetador DIAL-A-DEPTH Remarque SommaireAlimentation EN AIR Comprimé ET Raccordement Consignes DE SécuritéChargement DE L’APPAREIL FonctionnementOpération Caractéristiques DES N52FN ET N62FNAlimentation EN AIR Comprimé ET Raccordement Déflecteur D’ÉCHAPPEMENT Directionnel Chargement DU N52FN OU DU N62FNPour Prévenir UN Accident Chargement DES Clous EndroitFonctionnement DE L’APPAREIL Mode D’EMPLOIDéclenchement P AR LA Détente Vérification DU Système DE DéclenchementSystème DE Sécurité À LA Volée C.T Système DE Sécurité AU COUP-PAR-COUPPièces DE Rechange Alimentation D’AIR Pression VolumeProblème Cause Correction Problèmes DE FonctionnementPour Régler LE DIAL-A-DEPTH Enlevez LE Clou Coince

N52FN, N62FN specifications

The Quantaray N62FN and N52FN are versatile and affordable options for photography enthusiasts seeking to expand their creative toolbox without breaking the bank. These models are particularly suited for those who appreciate a blend of functionality, innovation, and ease of use in their photographic equipment.

The Quantaray N62FN is designed primarily for Nikon users, providing compatibility with a wide range of Nikon DSLR cameras. This lens features a focal length of 18-55mm, making it an excellent choice for everyday photography, from landscapes to portraits. The f/3.5-5.6 aperture ensures that users can capture images in a variety of lighting conditions, while the lightweight construction allows for easy portability. This lens also incorporates a 7-blade diaphragm, which creates beautiful bokeh in out-of-focus areas, enhancing the overall aesthetic of images.

The Quantaray N52FN lens, also compatible with Nikon cameras, offers a longer focal range of 55-200mm, making it ideal for capturing subjects from a distance, such as wildlife or sports events. This telephoto lens features a similar f/4-5.6 aperture, providing notable performance in both bright and low-light environments. Additionally, both models incorporate multi-coated lens elements that help reduce flares and ghosting, ensuring sharp, clear images with vibrant colors.

Both the N62FN and N52FN utilize a lightweight and durable design, allowing photographers to carry them comfortably for prolonged periods. They feature a robust build quality that withstands the rigors of frequent use in various shooting scenarios. The intuitive manual focus mechanism on both lenses provides a smooth and precise experience, while the autofocus capabilities ensure quick and efficient subject acquisition for dynamic photography needs.

In terms of technology, both lenses are built with advanced optical design principles, ensuring that they deliver exceptional image quality across the entire zoom range. The inclusion of aspherical lens elements in their construction minimizes distortion and aberrations, resulting in images that are clear and richly detailed.

Overall, the Quantaray N62FN and N52FN are powerful tools for photographers looking to enhance their imaging capabilities. Their balance of quality, performance, and affordability makes these lenses an appealing choice for both novice and experienced photographers alike, catering to a diverse array of photographic needs and styles.
Top Page Image Contents