Quantaray N62FN Tool Operation Check, Trigger Operated Tool, Tool Must not Cycle, Tool Must Cycle

Page 8

TOOL OPERATION CHECK:

CAUTION: Remove all fasteners from tool before performing tool operation check.

1. TRIGGER OPERATED TOOL:

A. With finger off the trigger, hold the tool with a firm grip on the handle.

B. Place the nose of the tool against the work surface.

C. Pull the trigger to drive. Release the trigger and cycle is complete.

CAUTION: THE TOOL WILL CYCLE EACH TIME THE TRIGGER IS PULLED!

2. CONTACT TRIP OPERATION:

A. With finger off the trigger, press the contact trip against the work surface.

THE TOOL MUST NOT CYCLE.

B. Hold the tool off the work surface, and pull the trigger.

THE TOOL MUST NOT CYCLE.

C. With the tool off the work surface, pull the trigger. Press the contact trip against the work surface.

THE TOOL MUST CYCLE.

D. Without touching the trigger, press the contact trip against the work surface, then pull the trigger.

THE TOOL MUST CYCLE.

3. SEQUENTIAL TRIP OPERATION:

A. Press the contact trip against the work surface, without touching the trigger.

THE TOOL MUST NOT CYCLE.

B. Hold the tool off the work surface and pull the trigger.

THE TOOL MUST NOT CYCLE.

Release the trigger. The trigger must return to the trigger stop on the frame.

C. Pull the trigger and press the contact trip against the work surface.

THE TOOL MUST NOT CYCLE.

D. With finger off the trigger, press the contact trip against the work surface. Pull the trigger.

THE TOOL MUST CYCLE.

IN ADDITION TO THE OTHER WARNINGS CONTAINED IN THIS MANUAL OBSERVE THE FOLLOWING FOR SAFE OPERATION

Use the BOSTITCH pneumatic tool only for the purpose for which it was designed.

Never use this tool in a manner that could cause a fastener to be directed toward the user or others in the work area.

Do not use the tool as a hammer.

Always carry the tool by the handle. Never carry the tool by the air hose.

Do not alter or modify this tool from the original design or function without approval from

BOSTITCH, INC.

Always be aware that misuse and improper handling of this tool can cause injury to yourself and others.

Never clamp or tape the trigger or contact trip in an actuated position.

Never leave a tool unattended with the air hose attached.

Do not operate this tool if it does not contain a legible WARNING LABEL.

Do not continue to use a tool that leaks air or does not function properly. Notify your nearest BOSTITCH representative if your tool continues to experience functional problems.

-8-

Image 8
Contents N52FN/N62FN Industrial OIL Free Angled Finish NailersIntroduction IndexSafety Instructions AIR Supply and ConnectionsLoading Tool OperationN52FN/N62FN Tool Specifications AIR Supply and Connections To Prevent Accidental Injuries Adjusting the MULTI-DIRECTIONAL ExhaustLoading the N52FN/N62FN Tool Operation Trigger OperationContact Trip Operation Sequential Trip OperationTool Operation Check Trigger Operated ToolTool Must not Cycle Tool Must CycleMaintaining the Pneumatic Tool Replacement PartsAIR SUPPLY-PRESSURE and Volume Trouble Shooting Problem Cause CorrectionJAM Release DIAL-A-DEPTH Fastener Control AdjustmentTo Adjust DIAL-A Depthtm Fastener Control Adjustment Accessories Available Page Nota IntroducciónÍndice Instrucciones DE Seguridad Suministro DE Aire Y ConexionesAL Cargar LA Herramienta OperaciónEspecificaciones DE LAS N52FN/N62FN Especificaciones DEL SujetadorConexión DE Aire DE LA Herramienta Presión DE OperaciónConexiones ManguerasFuente DE Suministro ReguladorCarga DE LAS Herramientas N52FN/N62FN Deflector Direccional DE LA SalidaAdvertencia Para Impedir Lesiones Accidentales Carga DE LOS ClavosOperación DE LA Herramienta Antes DE Manejar U Operar Esta HerramientaOperación DE Disp ARO POR Contacto Operación DE Disp ARO SecuencialVerificación DE LA Operación DE LA Herramienta Herramienta Operada POR GatilloOperación POR Disp ARO Secuencial LA Herramienta no Debe Efectuar SU CicloPartes DE Reemplazo Presión Y Volumen DEL Suministro DE AireMantenimiento DE LA Herramienta Neumática Problema Diagnóstico DE FallaRemueva EL Sujetador Atascado Ajuste DEL Control DE Fondo DEL Sujetador DIAL-A-DEPTHPara Ajustar EL Control DE Fondo DEL Sujetador DIAL-A-DEPTH Sommaire RemarqueConsignes DE Sécurité Alimentation EN AIR Comprimé ET RaccordementChargement DE L’APPAREIL FonctionnementCaractéristiques DES N52FN ET N62FN OpérationAlimentation EN AIR Comprimé ET Raccordement Chargement DU N52FN OU DU N62FN Déflecteur D’ÉCHAPPEMENT DirectionnelPour Prévenir UN Accident Chargement DES Clous EndroitMode D’EMPLOI Fonctionnement DE L’APPAREILVérification DU Système DE Déclenchement Déclenchement P AR LA DétenteSystème DE Sécurité À LA Volée C.T Système DE Sécurité AU COUP-PAR-COUPAlimentation D’AIR Pression Volume Pièces DE RechangeProblèmes DE Fonctionnement Problème Cause CorrectionEnlevez LE Clou Coince Pour Régler LE DIAL-A-DEPTH

N52FN, N62FN specifications

The Quantaray N62FN and N52FN are versatile and affordable options for photography enthusiasts seeking to expand their creative toolbox without breaking the bank. These models are particularly suited for those who appreciate a blend of functionality, innovation, and ease of use in their photographic equipment.

The Quantaray N62FN is designed primarily for Nikon users, providing compatibility with a wide range of Nikon DSLR cameras. This lens features a focal length of 18-55mm, making it an excellent choice for everyday photography, from landscapes to portraits. The f/3.5-5.6 aperture ensures that users can capture images in a variety of lighting conditions, while the lightweight construction allows for easy portability. This lens also incorporates a 7-blade diaphragm, which creates beautiful bokeh in out-of-focus areas, enhancing the overall aesthetic of images.

The Quantaray N52FN lens, also compatible with Nikon cameras, offers a longer focal range of 55-200mm, making it ideal for capturing subjects from a distance, such as wildlife or sports events. This telephoto lens features a similar f/4-5.6 aperture, providing notable performance in both bright and low-light environments. Additionally, both models incorporate multi-coated lens elements that help reduce flares and ghosting, ensuring sharp, clear images with vibrant colors.

Both the N62FN and N52FN utilize a lightweight and durable design, allowing photographers to carry them comfortably for prolonged periods. They feature a robust build quality that withstands the rigors of frequent use in various shooting scenarios. The intuitive manual focus mechanism on both lenses provides a smooth and precise experience, while the autofocus capabilities ensure quick and efficient subject acquisition for dynamic photography needs.

In terms of technology, both lenses are built with advanced optical design principles, ensuring that they deliver exceptional image quality across the entire zoom range. The inclusion of aspherical lens elements in their construction minimizes distortion and aberrations, resulting in images that are clear and richly detailed.

Overall, the Quantaray N62FN and N52FN are powerful tools for photographers looking to enhance their imaging capabilities. Their balance of quality, performance, and affordability makes these lenses an appealing choice for both novice and experienced photographers alike, catering to a diverse array of photographic needs and styles.