Woodstock W1678 instruction manual Assembly, Unpacking, Box Contents

Page 12

ASSEMBLY

Unpacking

ASSEMBLY

Get moving assistance before starting assembly. The Model W1678 Double Drum Sander is a heavy load at 435 pounds.

The Model W1678 26" Double Drum Sander is carefully packed. However, if it is damaged or is missing any parts, please contact Woodstock International Service and Support at 1-360-734-3482 or send e-mail to: tech-support@shopfox.biz.

Box Contents

Lay out and inventory the shipped parts to familiarize yourself with your Model W1678 26" Double Drum Sander. See Figures 10 and 11. This will help with the machine assembly.

NOTICE

Depending on manufacture date, some of the box contents may already be installed on your sander.

Item			Qty.
1.	W1678 26" Double Drum Sander		1
2.	Control Box		1
3 Dust Port (Flat Base)			1
4.	Dust Port (Concave Base)		1
5.	Crank Wheel		1
6.	Crank Handle		1
7.	Hand Knob		2
8.	Handle		2
9.	Bolt and Wrench Bag:		1
	• Self Tapping Screw (#8 X 1⁄2")		8
	•	Flat Washer (#10)	8
	• Cap Screw (5⁄16"-18 X 1")		4
	•	Lock Washer (5⁄16")	4
	•	Hex Nut (5⁄16"-18)	4
	• Set Screw (5⁄16"-18 X 1⁄2")		1
	• Set Screw (1⁄4"-20 X 5⁄16")		2
	• Allen® Wrench (3 mm)		1
	• Allen® Wrench (4 mm)		1
	• Allen® Wrench (6 mm)		1

-10-

1

2

Figure 10. W1678 26" Double Drum Sander

5

8

4

7

6

9

3

Figure 11. Components

Image 12

Contents Model W1678 Page Table of Contents Woodstock Service and Support IntroductionAbout Your New 26 Double Drum Sander Warranty and Returns SpecificationsSafety Standard Safety InstructionsSafety Keep proper footing and balance at all timesAdditional Safety Instructions for Drum Sanders Model W1678Avoiding Potential Injuries Never stand in the path of potential Workpiece kickbackSafety 220V Operation Extension CordsGrounding Assembly Box ContentsUnpacking Shop Preparation Initial Cleaning To install dust ports and handles, do these steps BeginningDust Port Handles To install the control box, do these steps To install the crank and handle, do these stepsControl Box Crank and HandleAdjustments To adjust the drum-to-conveyor squareness, do these stepsDrums and Pressure Rollers Unplug the Double Drum Sander30 gauge block positioning To adjust the drum-to-conveyor parallelism, do these steps Step25⁄8 gauge block positioning To adjust the drum-to-conveyor height, do these steps Part 3 Drum-to-Conveyor HeightPart 4 Pressure Roller Adjustment To adjust pressure-roller spring tension, do these stepsDust Scoop Gap Dust scoop gapBelt Tension Front panel and mounting screwsConveyor Belt Conveyor belt hanging gapOperations Overview Control PanelControl panel offers these controls Basic Sanding OperationMain power ON/OFF safety switch To use the double drum sander, do these stepsLoad meter Troubleshooting Long grooves Maintenance General Sanding BeltsMaintenance LubricationBrush Replacement Sandpaper ReplacementBearing Replacement Slide the bearing out of the bearing block. See FigureBearing-block grease grove Grease port General Cleaning Drive System Wiring Diagram W1678 26 Double Drum SanderControl System Wiring Diagram Closure Parts Scale 143 146 145 144 142 151 154 110 111 106 105 Pressure Roller 227 Side Panel 337 Magnetic Switch Page Page Page BOX BELLINGHAM, WA Warranty Card