Woodstock W1667 instruction manual Adjustments

Page 21

ADJUSTMENTS

-19-

Image 21
Contents 81⁄2 Oscillating Drill Press Page Contents About Your W1667 8 1⁄2 Oscillating Drill Press Woodstock Service and SupportSpecifications Warranty and ReturnsDisconnect machine when cleaning, adjusting or servicing Standard Safety InstructionsKeep proper footing and balance at all times Additional Safety Instructions for Drill PressesNever drill while holding Workpiece by hand Avoiding Potential Injuries110V Operation GroundingExtension Cords Box Contents AssemblyTo install the dust port, do these steps To install the base and column, do these stepsBase and Column Dust PortLoosely installing table lock lever To install the table, do these stepsAligning the pocket in the headstock With the column HeadstockTo install the handles, do these steps To install the drill chuck, do these stepsDrill Chuck HandlesBelt Tension To adjust the drive belt tension, do these stepsFeed Shaft Spring Tension To adjust the feed shaft spring tension, do these stepsHold the spring cover tightly Quill-Shaft ScrewSupport table while loosening lock Table Height / TiltLoosening the lock knob Drilling SpeedDrill Press RPM Chart To adjust the drilling depth, do these stepsDrilling Depth Adjustments Adjustments Starting the Drill Press OperationsTo change drill bits and sanding drums, do these steps Drill/Drum ChangesUsing the Oscillator To use the oscillating feature, do these stepsRemove the spindle handles Sanding drum installed Table and Base GeneralLubrication Sanding SleevesTroubleshooting Parts Diagram Parts List Drill Press Accessories Drill Press Accessories Warranty Card BOX BELLINGHAM, WA