Woodstock W1667 instruction manual Standard Safety Instructions

Page 6

SAFETY

SAFETY

READ MANUAL BEFORE OPERATING MACHINE

FAILURE TO FOLLOW INSTRUCTIONS BELOW WILL

RESULT IN PERSONAL INJURY

Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury and damage to the machine. It may also be used to alert against unsafe practices.

This symbol is used to alert the user to useful information about proper NOTICE operation of the equipment.

Standard Safety Instructions

1.Thoroughly read the instruction manual before operating your machine. Learn the applications, limitations and potential hazards of this machine. Keep manual in a safe, convenient place for future reference.

2.Keep work area clean and well lighted. Clutter and inadequate lighting invite potential hazards.

3.Ground all tools. If a machine is equipped with a three-prong plug, it must be plugged into a three-hole electrical outlet or grounded extension cord. If using an adapter to aid in accommodat- ing a two-hole receptacle, ground the adapter using a screw to a known ground.

4.Wear eye protection at all times. Use safety glasses with side shields or safety goggles, meeting the national safety standards, while operating this machine.

5.Avoid dangerous environments. DO NOT operate this machine in wet or open flame environ- ments. Airborne dust particles could cause an explosion and severe fire hazard.

6.Ensure all guards are securely in place and in working condition.

7.Make sure switch is in the “OFF” position before connecting power to machine.

8.Keep work area clean; free of clutter, grease, etc.

9.Keep children and visitors away. All visitors should be kept at a safe distance away while operat- ing unit.

10.Childproof workshop with padlocks, master switches or by removing starter keys.

11.Disconnect machine when cleaning, adjusting or servicing.

-4-

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 81⁄2 Oscillating Drill Press Page Contents Woodstock Service and Support About Your W1667 8 1⁄2 Oscillating Drill PressWarranty and Returns SpecificationsStandard Safety Instructions Disconnect machine when cleaning, adjusting or servicingAdditional Safety Instructions for Drill Presses Keep proper footing and balance at all timesAvoiding Potential Injuries Never drill while holding Workpiece by hand110V Operation GroundingExtension Cords Assembly Box ContentsBase and Column To install the base and column, do these stepsTo install the dust port, do these steps Dust PortTo install the table, do these steps Loosely installing table lock leverHeadstock Aligning the pocket in the headstock With the columnDrill Chuck To install the drill chuck, do these stepsTo install the handles, do these steps HandlesTo adjust the drive belt tension, do these steps Belt TensionTo adjust the feed shaft spring tension, do these steps Feed Shaft Spring TensionQuill-Shaft Screw Hold the spring cover tightlyTable Height / Tilt Support table while loosening lockDrilling Speed Loosening the lock knobDrill Press RPM Chart To adjust the drilling depth, do these stepsDrilling Depth Adjustments Adjustments Operations Starting the Drill PressDrill/Drum Changes To change drill bits and sanding drums, do these stepsUsing the Oscillator To use the oscillating feature, do these stepsRemove the spindle handles Sanding drum installed Lubrication GeneralTable and Base Sanding SleevesTroubleshooting Parts Diagram Parts List Drill Press Accessories Drill Press Accessories Warranty Card BOX BELLINGHAM, WA
Top Page Image Contents