Woodstock W1667 instruction manual Drill Press Accessories

Page 32

Drill Press Accessories

The SHOP FOX® D2056 Tool Table is great for bench-top tools like chop saws, drill presses, planers, scroll saws and bandsaws. Support cross braces on top provide incredible strength and capacity. Flared legs and adjustable rubber feet ensure stability and reduce machine vibration. Butcher block finish table top measures 13" x 23" and is 301⁄2" tall with a 700 lb. capacity.

D2251 Steelex® Adjustable Circle Cutter cuts flat-sided holes in wood from 1" to 5". Made of M-2 alloy steel, this Circle Cutter features a 3⁄8" hex shank, 5⁄16" drill, center point and Allen® wrench.

D3161 Steelex® Heavy-Duty Carbide-Tipped Adjustable Circle Cutter

is Carbide Tipped and cuts 13⁄4" to 53⁄4" diameter holes in the toughest material. For use with 1⁄2" drill press chucks. Includes hex wrench and 7⁄16" pilot drill.

Woodstock offers a full line of Brad Point Bits,Tenon/Plug Cutters, Countersink Bits, and Stubby Drill Bits to satisfy every need. Whether for do-it-yourselfers or professional woodworkers, you can depend on Woodstock International Inc. to manufacture a useful selection of drilling and cutting tools. Refer to http://www.woodstockint.com/drilling.cfm for a complete product line available through your dealer.

Steelex® Carded Forstner Bits stack up as some of the best bits in the world. In fact, an independent testing lab proved that the Steelex® brand cut was equal to or better than Forstner Bits from Austria, known for being the best. For use with drill presses. Refer to http://www.woodstockint.com/forstner.cfm for a complete product line available through your dealer.

Steelex Plus® Bi-Metal Hole Saws stay sharper longer than carbon steel hole saws. Equipped with high-speed steel alloy cutting teeth bonded to a welded steel body, they cut wood, metal and plastics with ease.

D2784 10-pc. Bi-Metal Hole Saw Set

D2020 8-pc. Aggressive Hole Saw Set

D2783 6-pc. Bi-Metal Hole Saw Set

D2797 1⁄2" X 20 UNF Hole Saw Arbor

D2798 5⁄8" X 18 UNF Hole Saw Arbor

D2799 12" Hole-Saw Arbor Extension

D2928 Replacement Pilot Drill for D2797

D2929 Replacement Pilot Drill for D2798

-30-

Page 31 Page 33
Image 32
Page 31 Page 33
Contents 81⁄2 Oscillating Drill Press Page Contents Woodstock Service and Support About Your W1667 8 1⁄2 Oscillating Drill PressWarranty and Returns SpecificationsStandard Safety Instructions Disconnect machine when cleaning, adjusting or servicingAdditional Safety Instructions for Drill Presses Keep proper footing and balance at all timesAvoiding Potential Injuries Never drill while holding Workpiece by handExtension Cords 110V OperationGrounding Assembly Box ContentsTo install the base and column, do these steps To install the dust port, do these stepsBase and Column Dust PortTo install the table, do these steps Loosely installing table lock leverHeadstock Aligning the pocket in the headstock With the columnTo install the drill chuck, do these steps To install the handles, do these stepsDrill Chuck HandlesTo adjust the drive belt tension, do these steps Belt TensionTo adjust the feed shaft spring tension, do these steps Feed Shaft Spring TensionQuill-Shaft Screw Hold the spring cover tightlyTable Height / Tilt Support table while loosening lockDrilling Speed Loosening the lock knobDrilling Depth Drill Press RPM ChartTo adjust the drilling depth, do these steps Adjustments Adjustments Operations Starting the Drill PressDrill/Drum Changes To change drill bits and sanding drums, do these stepsRemove the spindle handles Using the OscillatorTo use the oscillating feature, do these steps Sanding drum installed General Table and BaseLubrication Sanding SleevesTroubleshooting Parts Diagram Parts List Drill Press Accessories Drill Press Accessories Warranty Card BOX BELLINGHAM, WA
Top Page Image Contents