Drill Press Accessories

The following drill press accessories may be available through your local Woodstock International Inc. Dealer. If you do not have a dealer in your area, these products are also available through online deal- ers. Please call or e-mail Woodstock International Inc. Customer Service to get a current listing of deal- ers at: 1-800 840-8420 or at sales@woodstockint.com.

Sanding Sleeves are sized to fit the D2677 Drum Sander Set. These hard Sanding Sleeves are available in 60, 80, 100, 120, and 150 grits. Keep plenty of these consumable Sanding Sleeves on hand.

Sanding Sleeves

Size
(Dia. x Ht.)	60 Grit	80 Grit	100 Grit	120 Grit	150 Grit

1" X 41⁄4"	D2683	D2684	D2685	D2686	D2687
11⁄2" X 41⁄4"	D2688	D2689	D2690	D2691	D2692
2" X 41⁄4"	D2693	D2694	D2695	D2696	D2697

The 4" PRO-STIK®Stick with Handle is the easiest solution for increasing the life of sanding sleeves by removing pitch and sawdust particles from the abrasive pores, which later harden in place if not removed. Simply press the cleaner lightly against the moving abrasive surface to remove clogged-up pitch and sawdust. PRO-STIK®cleaners are available in other sizes for any cleaning application that would need cleaners with handles, as blocks, or as flat pads. (Not recommended for wide-belt sanders.)

D2677 Drum Sander Set includes three rubber sanding drums 41⁄4" in length to accommodate 1", 11⁄2" and 2" diameter sanding sleeves. This kit also includes one 80 grit sleeve for each drum to get things started.

D2722 Mandrel is a 3⁄8" shank and is required to use our Drum Sander Set with any machine. Mandrel is included with the SHOPFOX® Oscillating

Drill Presses featured above.

Drill Press Clamps adjust quickly and easily to lock your workpiece in any position. The clamping pad pivots to conform to any workpiece, ensuring uniform pressure.

W1301 6" Drill Press Clamp (11⁄2" Capacity)

D2192 10" Drill Press Clamp (3" Capacity)

D2493 12" Drill Press Clamp (5" Capacity)

SHOP FOX® Drill Press Vises use precision ground steel guide rods, smooth-action Acme threads, ground steel jaws, with fixed jaw V- grooves for holding round stock, and dovetailed ways where applicable.

D2727 SHOP FOX® (3" Basic Vise)

D2728 SHOP FOX® (4" Basic Vise)

D2729 SHOP FOX® (6" Basic Vise)

D2933 SHOP FOX® (33⁄4" Angle Vise)

D2730 SHOP FOX® (3" Cross Sliding Vise)

D2731 SHOP FOX® (4" Cross Sliding Vise)

-29-