INTRODUCTION
INTRODUCTION
About Your W1667 8 1⁄2'' Oscillating Drill Press
This new SHOP FOX® Model W1667 8 1⁄2'' Oscillating Drill Press has been specially designed by Woodstock International, Inc. to provide many years of trouble free service. Close attention to detail, ruggedly built parts and a rigid quality control program assure safe and reliable operation.
The Model W1667 8 1⁄2'' Oscillating Drill Press is a drill press and an oscillating sander in one compact machine. It is capable of a wide variety of drilling and sanding operations. A sanding spindle is included for use with drums ranging in size from 1" to 2" diameter and 4 1⁄4" long. Purchasing drums and sleeves will allow you to sand small or finely detailed pieces; and with the oscillating feature, your abrasives will last longer and provide a better finish. The tilting table allows surfaces to be sanded at many different angles. Included are table inserts to give maximum support for the workpiece and a dust port for connection to your dust collection system. The Model W1667 is packaged with a drill chuck, motor and paddle switch with removable safety key.
Woodstock International, Inc. is committed to customer satisfaction in providing this manual. It is our intent to make sure all the information necessary for safety, ease of assembly, practical use and dura- bility of this product be included.
If you need the latest revised edition of this manual, you can download it from http://www.shopfox.biz.
If you still have questions after reading the latest revised manual, or if you have comments please contact us at:
Woodstock International, Inc.
Attn: Technical Department
P.O. Box 2309
Bellingham, WA 98227
Woodstock Service and Support
We stand behind our machines! In the event that a defect is found, parts are missing or questions arise about your machine, please contact Woodstock International Service and Support at