J<KLG
| D('*0()$Jg\\[;i`ccGi\jj | |
;i`cc:_lZbXe[8iYfi | Chuck Key | MT4/JT3 |
The drill chuck attaches to the spindle by means of the |
| Arbor |
|
| |
arbor, shown in =`^li\(.. Matched tapers on the arbor |
|
|
and the inside of the chuck create a |
|
|
assembly when properly joined. |
|
|
KfXjj\dYc\k_\[i`ccZ_lZbXe[dflek`kkfk_\jg`e$ |
|
|
[c\#[fk_\j\jk\gj1 |
|
|
(% Use mineral spirits to thoroughly clean the drill | JT3 Drill |
|
chuck, arbor, and spindle sockets and dry all sur- | Drift Key | |
faces before assembly. Follow all safety warnings | Chuck | |
on the container of the mineral spirits.=X`cli\kf | =`^li\(.% Chuck components and tools. | |
Zc\Xek_\dXk`e^jli]XZ\jdXpZXlj\k_\kXg\i\[ | ||
]`kkfcffj\e[li`e^fg\iXk`fe#i\jlck`e^`ej\gXiX$ |
|
|
k`feXe[XelejX]\Zfe[`k`fe% |
|
|
)% Use the chuck key to adjust the jaws of the drill |
| |
chuck until they are inside the drill chuck body. | ||
Up | ||
|
*% Place the drill chuck face down on a workbench. The arbor has a short taper and a long taper. Place the short taper into the socket in the back of the drill chuck and tap it with a rubber or wooden mal- let, as shown in =`^li\(/. If the chuck fails to remain secure on the arbor, repeat Jk\gj( & *.
+% Slide the arbor into the spindle socket while slowly |
|
|
|
|
|
rotating the drill chuck. The socket has a rectangu- |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| |
|
| =`^li\(/% Seating the arbor into the | |||
lar pocket into which the tang (or flat portion of the |
|
| |||
|
| chuck. | |||
arbor shown in =`^li\(/) will fit. |
|
| |||
|
|
|
|
| |
,% Using a rubber mallet, seat the chuck as shown in =`^li\(0.
;FEFKlj\Xjk\\c_Xdd\ifek_\[i`ccZ_lZbkf j\Xkk_\XiYfi`ekfk_\jg`e[c\%Pfln`cc[XdX^\k_\ Z_lZbXe[&fijg`e[c\#n_`Z_dXpdXb\k_\dlelj$ XYc\filejX]\%
=`^li\(0% Seating the arbor and chuck
into the spindle.