D('*0()$Jg\\[;i`ccGi\jj
:fcldeXe[9Xj\
The column must be secured on the base to properly assemble your drill press.
Kfj\Zli\k_\Zfcldekfk_\YXj\#[fk_\j\jk\gj1
(% Place the column on the base and align the mount- ing holes.
)% Secure the column to the base with the four
KXYc\9iXZb\k
The table bracket must be installed as described to prop- erly assemble your drill press.
Kf`ejkXcck_\kXYc\jlggfik#[fk_\j\jk\gj1
(% Place the pinion in the table bracket, as shown in =`^li\0, so the pinion and gear teeth mesh togeth- er.
)% Mark the top of the rack, as shown in =`^li\(', to keep track of which end is up.
*% Remove the column ring by loosening the setscrew, and remove the rack.
Continued on next page
Hex Bolts
=`^li\/% Column secured to base.
=`^li\0% Pinion correctly installed in
table bracket.
Column
Ring
Marking
Location
J<KLG
Rack
=`^li\('% Marking the top of the rack.