Simrad SIMRAD HS50 manual Standard delivery, Optional equipment, Documentation

Page 63

PARTS LIST

7. PARTS LIST

7.1Standard delivery

The standard HS50 consists of:

Part no.

No.

Description

20212858

1

HS50 Sensor unit, including 1 meter cable and 4 fastening bolts

22084289

1

HS50 Processing unit including 4 fastening screws

20212759

1

HS50 Display unit, including 15 meter cable, flush mounting

 

 

kit and protecting cover

20212940

1

30 meter cable

20213054

1

HS50 Standard English documentation, including cut-out

 

 

templates and Quick Reference guide.

7.2Optional equipment

The HS50 can be delivered with following optional equipment:

Part no.

Description

20213039

HS50 Sensor Unit Mounting Bracket

20213021

HS50 Sensor Unit Mounting Pedestal

22084941

Mounting bracket for Display unit

7.3Documentation

The HS50 system includes English documentation only, and national documentation has to be ordered separately.

All national documentation includes a Quick Reference Guide. The following documentation can be delivered:

Part no.

Description

20213245

HS50 Documentation, Swedish

20213252

HS50 Documentation, Spanish

20213609

HS50 Documentation, Italian

20221081 / F

55

Image 63
Contents Simrad HS50 Heading Sensor Copyright 20221081 / F Document revisions Contents Operating Instructions Figures and Drawings This page Intentially Left Blank HS50 System components Introduction20221081 / F About this manual Definitions, abbreviations and acronymsDefinitions Nmea Abbreviations and acronymsHealth, environment and safety Restrictions in guaranteeRestrictions in use Display unit Physical dimensionsPerformance data Sensor unitPower Environmental specificationProcessing unit Cable InterfaceProcessing unit to sensor unit cable General Cable connectionGrounding Location of the unit Sensor unitMechanical installation Bracket mounting option Pedestal mounting option Cable wiringDisplay unit Waterproofing the connectorsAlternative panel mounting Panel mountingBracket mounting option Display unit cable Processing unit Cable connections Display Unit Sensor Unit Connecting to Simrad equipment RGC Signal Interface unitAP9MK3 Autopilot J50/J300X Junction unit NI300XIS15 Instruments Simrad RA40/RA50 Radar RGC12 Gyro CompassSoftware setup procedure Example Display AdjustmentsDifferential corrections All six serial lines may be used simultaneously Data outputGeneral EthernetDatum Height aidingVelocity filtering Radar formatHDT-Q Expert setupHeading offset Run modeExample Overview Operating InstructionsPerformance monitoring Turning the system ON/OFF348 Navigation/POS display Navigation/HDT displayHdop Pdop Info displaysGps hdt Deviation Accuracy Last heading Common sat Alarms Invalid Position alarm Invalid Heading alarmInvalid Position and Heading alarm Height aided GPS position OperationThis page Intentially Left Blank Periodic maintenance MaintenanceRe-calibration of the Sensor unit Software upgradesReplacing damaged units TroubleshootingRepairs and modifications Replacing damaged cablesNo valid data No responseInvalid Heading No Differential correctionsSimulated data Reduced heading indicationFigures and Drawings Seatex DimensionsKongsberg Seatex Sensor unit bracket, dimensionsSensor unit Processing unit, dimensions Display unit, dimensions Standard delivery Optional equipmentDocumentation