INSTALLATION
Example:
The following example shows how to change the ROT Max value in the Display adjustment submenu using the keys and the rotary knob:
1Press the SETUP key for 5 seconds until the Setup menu appear on the screen.
2Select Display adjustment by turning the knob clockwise
3Press the arrow down key until the cursor is at the ROT Max position
4Turn the knob to left or right until wanted value appear on the screen
5Press the SETUP key to get back to the main menu
Press the arrow down key until the cursor is at the Activate position and then turn the knob clockwise. Then the new setup is activated.
Display Adjustments
In the Display adjustments submenu the backlighting and contrast of the display are adjusted. The format for velocity (knots or m/s) and resolution on position displayed may be specified, together with the maximum rate of turn (ROT) value to be shown on the display. Default value for ROT is 20°/s.
When navigation information (NAV1 or NAV2 menu, refer page 36) are selected, the display backlighting may be increased or decreased by using the rotary knob.
20221081 / F | 25 |