Husky manual ENG A05051

PROBLEM	CAUSE	CORRECTION
Compressor is	Prolonged excessive use of	Decrease amount of air
not supplying	air.	usage.
enough air to		Check the accessory air
operate	Compressor is not large
accessories.	enough for air requirement.	requirement. If it is higher
		than the SCFM or pressure
		supplied by your air
		compressor, you need a
		larger compressor.
	Hole in hose.	Check and replace if
		required.
	Air leaks.	Tighten any exposed fittings.
Motor will not	Fuse blown, circuit breaker	Check fuse box for blown
run.	tripped.	fuse and replace as
		necessary. Reset circuit
		breaker. Do not use a fuse or
		circuit breaker with higher
		rating than that specified for
		your particular branch circuit.
		Check for proper fuse. You
		should use a time delay fuse.
		Check for low voltage
		problem.
		Check the extension cord.
		Disconnect the other
		electrical appliances from
		circuit or operate the
		compressor on its own
		branch circuit.
	Extension cord is wrong	Check the extension cord.
	length or gauge.
	Loose electrical	Check wiring connection
	connections.	inside terminal box.
	Faulty motor.	Have checked by a Trained
		Service Technician.

19- ENG A05051