Schneider Electric ATV61 manual Altivar 38 hardware identification

Altivar 38 hardware identification

Before selecting the Altivar 61, the Altivar 38 hardware configuration needs to be determined carefully.

1Measure the line voltage and indicate the type of power supply:

2

3

Line voltage:_________V Three-phase

Note down the drive catalog number, which appears on the Altivar 38 nameplate:

ATV38______________________

Note down the catalog number of any EMC filter installed under the drive:

VW3A584 ___________________

				ATV38HD16N4
				Motor Rating : 11 kW / 15HP
Input V : 380/460V-50/60Hz				Output 3 Ph : 380/460V
Input phase : 3				Output I : 22A
Input I : 35.4/28 A				Output I max. transient (1mn) : 24.2A
Input fuse : Type J : 60A Max				Output frequency : 0.1-500Hz
		Cu AWG 6 : 75˚C : 20lb-in/2.26 Nm
			N998
	LISTED 170M
	IND.CONT.EQ
				Motor Protective Device
				AIC 22000 A Protection type Classe 20
Serial N . 1703001070				France - 6W	0202

4

Note down the catalog number of any option cards installed in the Altivar 38; this can be found on the label attached to the card:

VW3A58_____________________

5 Note down whether the operator terminal is used:
VW3A58101:	YES	NO
Is the operator terminal connected remotely on the enclosure	YES	NO
door?

6Note down the catalog number of the NEMA type 1 mounting kit, if used: VW3A5885___________________

7Note down the catalog number of the control card fan kit, if used: VW3A5882___________________

8Make sure you have the diagrams for the existing installation.

5