Husqvarna FS 6600 D, FSA 8400 D Stopping The Saw, Incidents During Sawing, See Figures

Page 54

•Rotate the BLADE DEPTH INDICATOR (1Q) needle to align to the “0” depth.

•As DIAMOND BLADE (2E) is lowered into the cutting surface, the current cutting depth will now be indicated by the Orange text number range on BLADE DEPTH INDICATOR (1Q) needle.

SMD or “Set Maximum Depth” Mode without BLADE DEPTH STOP (White colored numbers show uncut depth):

•Turn ENGINE START SWITCH (1H) to “0” (OFF) position to STOP engine (If running).

•Turn ENGINE START SWITCH (1H) to “1” (RUN) position to power electrical system.

•Lower DIAMOND BLADE (2E) by pushing TOGGLE SWITCH (1P) on the SPEED CONTROL LEVER (1O) downward until DIAMOND BLADE (2E) touches the surface to be cut.

•Rotate the BLADE DEPTH INDICATOR (1Q) needle to align with the desired maximum cutting depth on White colored number range. The uncut depth will now be indicated on the White colored number range. When the BLADE DEPTH INDICATOR (1Q) needle gets to the “0” position, the saw is cutting at the desired maximum cutting depth.

•Raise the blade by pushing the TOGGLE SWITCH (1P) on the SPEED CONTROL LEVER (1O) upward until the DIAMOND BLADE (2E) is off of the cutting surface.

•Turn the ENGINE START SWITCH (1H) to the “0” (OFF) position to turn off power to electrical system.

SMD or “Set Maximum Depth” Mode using BLADE DEPTH STOP SWITCH (1M) (White colored numbers show uncut depth):

•Turn ENGINE START SWITCH (1H) to “0” (OFF) position to STOP engine (If running).

•Set the BLADE DEPTH STOP SWITCH (1M) to the “0” (OFF) position to override the depth stop setting. Saw will raise and lower over its full range without stopping.

•Turn ENGINE START SWITCH (1H) to “1” (RUN) position to power electrical system.

•Lower DIAMOND BLADE (2E) by pushing TOGGLE SWITCH (1P) on the SPEED CONTROL LEVER (1O) downward until DIAMOND BLADE (2E) touches the surface to be cut.

•Rotate the BLADE DEPTH INDICATOR (1Q) needle to align with the desired maximum cutting depth on White colored number range.

•Set the BLADE DEPTH STOP SWITCH (1M) to “1” (ON) position.

•Raise the blade by pushing the TOGGLE SWITCH (1P) on the SPEED CONTROL LEVER (1O) upward until the DIAMOND BLADE (2E) is off of the cutting surface.

•Turn the ENGINE START SWITCH (1H) to the “0” (OFF) position to turn off power to electrical system.

•Now the maximum cutting depth is set. If the saw is raised out of the cut surface for any reason it can now be lowered to “Set Max. Depth” by lowering the blade until the saw lowering movement stops.

The saw WILL NOT lower to any depth greater than the position set on the BLADE DEPTH STOP SWITCH (1Q). If a deeper cut is required, the BLADE DEPTH INDICATOR (1Q) MUST be turned to the new depth position. Or push the BLADE DEPTH STOP SWITCH (1M) to “0” (OFF) position to override the Depth Stop Feature.

7 Stopping The Saw

(See Figures 1-2)

For EMERGENCY STOP, press down the RED PALM SWITCH (1K) on the cowl. This will stop the engine and disconnect power to all electrical items except lights. Reset the RED PALM SWITCH (1K) by pulling out until it pops up, then restart engine.

•Move the Control Lever (1O) to the STOP (1BB) position.

•Raise the Diamond Blade (2E) out of the cut by pressing the Raise/Lower Switch (1P) on the Control Lever (1O) upward until the Diamond Blade (2E) clears the surface.

•Disengage the Blade Clutch Switch (1V) if equipped with clutch.

•Turn the Engine Throttle (1F) to the LOW IDLE position.

•Turn off the Water Valve (1T).

•Let the Engine run at idle for a few minutes before shutting off.

•STOP the engine by turning the Engine Start Switch (1H) to the “0” (OFF) position.

8 Incidents During Sawing

(See Figures 1-2)

If ENGINE STOPS during sawing, check the following:

•Engine out of fuel—Check Fuel Gauge (1X).

•Lack of water signals the Water Safety Switch (1L) to stop the engine. Set Switch (1L) to “0” (OFF) and then restart the engine.

•Excessively fast cutting speed will stall engine.

•Red Palm Emergency Switch (1K) has been pressed down. Reset by pulling toggle switch until it pops upward.

•Circuit Breaker is blown (1Z). Push to Reset

If the Diamond Blade (2E) STOPS during sawing, check:

•Drive belt tension is inadequate.

•The clutch switch has been pushed to “0” OFF

•The clutch has an electrical failure or blown fuse.

54

Page 53 Page 55
Image 54
Page 53 Page 55
Contents Operator’s manual FS 6600 D 3-Speed Model Eff. S/NDéclaration DE Conformité À LA Directive « Machines » Manufacturer El FabricanteNotas Remarque Table of Contents ÍNDICE DE PáginaTable des matières Notas Remarque Safety First BladeDo not USAAdvertencias Advertencias Faire Usure inhabituelle, NE PAS Utiliser LE DisqueNE PAS Faire Page Page Page Page Page Page Page Page Poison Exhaust GAS General InformationDust Warning California Prop 65 WarningTechnical Data Sound Level, EMC, and HAV Sound LevelAdvertencia Peligro Para LA AUDICIóNInformación general Advertencia Relativa AL Polvo Advertencia de la Proposición 65 del Estado de CaliforniaDatos técnicos Nivel sonoro, EMC y HAV Nivel sonoroAvertissement Information généraleAvertissement Relatif À LA Poussière Proposition 65 de Californie AvertissementDonnées techniques niveau sonore, CEM et VMB Niveau sonoreGearbox Range / Blade RPM Gearbox Range / Blade RPMOperating Instructions Depth INDICATOR, TOPBlade Rotation Direction Depth Indicator THROTTLE, DieselTachometer / Blade RPM-4.5 Flange Transmission Bypass ValveHusqvarna Crown H Decal Tachometer / Blade RPM-5.0 FlangeMuffler HOT Manual Axle AdjustmentBlade Guard Warning TOP of Blade Guard Front Side of Muffler Brace Right Side Top of Fan ShieldSound Level CE Radiator Filter Rear CowlingPatents TOP of Blade Guard 542 19FS6600 Diesel Specifications Max. Horsepower Weight lb. Kg UncratedEngine Specifications Displacement cu. in. lEspecificaciones DE Diesel FS6600 Especificaciones DE Diesel FS8400 Spécifications DU FS6600 Diesel Spécifications DU FS8400 Diesel Special Instructions Instrucciones EspecialesInstructions Spéciales 2170 Información DEL Motor Service Every 100 Hours Service DailyService Every 50 Hours Service Every 250 Hours1I. Voltage Gauge Shows the voltage of the electrical system 1M. V-BELTS Set 1DD. Radiator AIR Filter Element2C. Outer Flange Arbor Use to support the diamond blade 1N. Gearbox Pulley2M. V-BELTS Set 2N. Gearbox Pulley5A. AIR Filter Assembly Includes 5F. Fuel Filter Water Separator See JohnHydrostatic Transmission Pump Do not Operate Engine with Shields RemovedUses Moving The MachineIndication Mandatory Information Instruction Transport Blade Removed Check Before StartingFitting The Blade See Figures 1, 2 Using the Blade Depth Indicator 1QStarting The Saw Blade Cutting Depth InformationStopping The Saw Incidents During SawingSee Figures Adjustments Straight Line Sawing MaintenanceHydraulic System Important AdviceBlade Shaft V-Belt Tension Fuel FilterBlade Shaft Speed Engine / Blade Shaft / Gearbox Speed AdjustmentEngine Speed Single Speed Gearbox ModelLarge Diameter Models AccessoriesWeight Kits Blade Guard Conversion KitsRepairs Spare PartsLista DE Comprobación Preliminar Figura 1Z. Interruptor Selector DEL Tacómetro 1AA. Colgador Para Manguera Sujeta la1N. Polea DE LA Caja DE Engranajes 1A. Caja DE Engranajes DEL Motor Modelo1M. Correas Trapezoidales Juego de 2A. Caja DE Engranajes DEL Motor Modelo2M. Correas Trapezoidales Juego de 2N. Polea DE LA Caja DE Engranajes5A. Conjunto DEL Filtro DE Aire Incluye 5N. Bomba DE Transmisión HidrostáticaUsos Traslado de la máquinaTransporte sin la hoja Revisiones antes del arranqueColocación de la hoja Información sobre la profundidad de corte de la hoja Arranque de la sierraVea las figuras 1, 2 y Uso del Indicador DE Profundidad DE LA Hoja 1QParada de la sierra Incidentes durante el corte con sierra Ajustes Corte en línea rectaMantenimiento Sistema DE Enfriamiento Tensión de la correa trapezoidal del eje de la hojaSistema hidráulico Filtro DE AireVelocidad DEL Motor Consejo importanteVea las figuras 2 y Velocidad DEL EJE DE LA Hoja152 mm 127 mm114,3 mm Reparaciones AccesoriosModelos de diámetro grande Piezas de repuestoListe DE Vérifications Avant Utilisation Guide Rapide DU Calendrier D’ENTRETIEN1L. Interrupteur DE Sécurité DE L’EAU 1O. Levier DE Commande DE Vitesse1J. Commutateur DE Réglage D’ESSIEU 1P. Commutateur DE RELEVAGE/ABAISSEMENT1X. Jauge Visuelle DU Niveau DE Carburant 1DD. Élément DE Filtre À AIR DU Radiateur1A. Boîte DE Transmission DU Moteur Modèle 1F. Écran Protecteur DE Courroie Les2F. Écran Protecteur DE Courroie Les 2M. Courroies Trapézoïdales Jeu de 2N. Poulie DE Boîte DE Transmission5A. Ensemble DU Filtre À AIR Comprend 5N. Pompe DE Transmission Hydrostatique6H. Filtre À Huile Moteur L’élément du filtre Déplacement de la machine UtilisationsTransport disque retiré Vérifier avant de démarrerMise en place du disque Marche Démarrage de la scieVoir les figures 1, 2 et Information sur la profondeur de sciage du disquePage Réglages Sciage en ligne droite Arrêt de la scieIncidents pouvant se produire durant le sciage EntretienTension des courroies trapézoïdales de l’axe du disque Disque EN Diamant Régime Moteur Circuit hydrauliqueConseil important Vitesse DE L’AXE DU DisquePage Kits DE Conversion DES Protections DE Disque Accessoires16 Modèles de grand diamètre Kits DE Masses D’ALOURDISSEMENT17 Réparations 18 Pièces détachéesNotas Notes Size To Convert To Size To ConvertFrom 900mm 1000mm FS8400 Diesel Blade Size Conversion Chart 1000mm 1200mm 1500mm 350 mm / 450 mm Tamaño para convertir aTamaño Pulgadas / 18 pulgadas 750 mmTamaño para Pulgadas Convertir de 1000 mm450 mm Tamaño 450 mm 650 mm 750 mm 900 mmFS8400 Diesel Tabla DE Conversiones DE Tamaños DE LA Hoja 36 po Taille à laquelle convertirTaille 14 po 18 po 26 po 30 po ’origine 42 poTaille 36 po 42 po ’origine 48 po Taille à laquelle converterTaille 18 po 26 po 30 po 36 po ’origine 60 poTaille 42 po 48 po 60 po ’origine 900mm14-26 18-30 20-36 26-42 FS 6600 DFS 8400 D 106 107 Schéma 3 Schéma de câblage Câblage du capot FS6600-FS8400 109 Component Designators for PRO 66/ PRO 111 504 63
Related manuals
Manual 98 pages 44.65 Kb

FSA 8400 D, FS 6600 D specifications

Husqvarna has long been a trusted name in the world of professional outdoor power equipment, and its FS 6600 D and FSA 8400 D models exemplify the company's commitment to quality and performance.

The Husqvarna FS 6600 D is a powerful walk-behind concrete saw that is renowned for its exceptional cutting efficiency and robust design. Powered by a high-torque diesel engine, the FS 6600 D is engineered to handle tough, heavy-duty applications with ease. One of its standout features is its adjustable, heavy-duty frame that can accommodate various blade sizes, making it versatile for different cutting depths and applications. The saw's integrated water system helps to manage dust and keeps the blade cool during operation, resulting in cleaner cuts and prolonging blade life. Furthermore, the intelligent design of the FS 6600 D includes an easy-to-use control panel, ensuring operators can quickly start and adjust the saw without hassle.

On the other hand, the Husqvarna FSA 8400 D is part of Husqvarna’s range of professional grass trimmers, specifically designed for demanding tasks and prolonged use. Its lightweight yet robust design makes it an ideal choice for professionals who require mobility and efficiency. The FSA 8400 D features a high-capacity battery and an efficient brushless motor, ensuring powerful performance with minimal noise and vibration. The trimmer’s adjustable handle and ergonomic design allow users to maneuver easily, reducing fatigue during extended usage.

Both products also incorporate advanced technologies to enhance user experience. For instance, the FS 6600 D employs Husqvarna’s SmartStart technology, allowing for easier and faster starts. Similarly, the FSA 8400 D utilizes an intuitive control system that seamlessly integrates speed and power settings, optimizing performance based on the demands of the task at hand.

In summary, the Husqvarna FS 6600 D and FSA 8400 D are prime examples of innovative engineering combined with user-focused design. Their robust features, advanced technologies, and unmatched performance make them essential tools for professionals looking to excel in their trade. Whether cutting concrete or tidying up grassy areas, Husqvarna proves that it understands the needs of its users, delivering reliable solutions that stand the test of time.
Top Page Image Contents