Bosch Appliances 2400E LP manual Use of optional remote control accessory, Operation, Reset button

4.4Use of optional remote control accessory

Bpress reset button in order to return heater to normal operation.

Fig. 32 Remote control

The wireless remote control accessory and the temperature selector buttons on the front of the water heater operate identically. Contact your installer or distributor to order the remote control accessory. Modification of the water heaters interior control unit (Fig. 48, component 25) is required when installing the remote control with this heater.

NOTE: up to 6 remote controls can be i programmed for one single water heater, each with a range distance of 98 ft (30 m).

4.5Operation

BWhen a hot water tap is opened, main burner ignites

and LCD displays indication .

Fig. 33

BLCD blinks until selected temperature is reached.

If display blinks continously, heater cannot maintain or achieve selected temperature.

4.6Reset button

If the LCD displays the error symbol and error code do not shut off power or unplug the heater.

Record the error code displayed on LCD and consult “Troubleshooting” section (Section 6.8, page 36).

Fig. 35 Reset button

If the problem persists or error code will not reset, contact your installer.

4.7Program button

The program button can be used on the appliance and on the remote control.

Programming “Program” function

Programming actions are similar for both controls (appliance control pad and wireless remote control).

Fig. 36 “Program” button

BPress buttons or to select temperature to be memorized.

BHold “Program” button for 3 seconds to save temperature.

When LCD stops blinking, selected temperature has been memorized.

Using “Program” function

In order to select memorized temperature

BPress “Program” key.

LCD shows pre-memorized temperature, which is now the hot water selected temperature.

4.8Locked condition

This condition is only valid for appliances utilizing one or more remote controls.