Adjustable Feed Stop, Micrometer Stop

	O P E R A T I O N
13" Heavy 13® Gearhead Lathe	O P E R A T I O N	For Machines Mfg. Since 5/11

Adjustable Feed Stop

Use the adjustable feed stop collar (shown in Figure 62) to set the location where the carriage should disengage from power feed.

When the apron stop plate contacts the stop collar during an operation that uses the feed rod, the clutch disengages the carriage from the feed rod and movement stops.

Stop

Plate

Stop

CollarApron

Figure 62. Adjustable feed rod stop collar.

The adjustable feed stop system is designed to stop longitudinal carriage movement at the desired location ONLY when the carriage is engaged with the feed rod.

When the carriage is engaged with the leadscrew for threading operations, the adjustable feed stop system WILL NOT stop carriage movement—you must use the half nut lever instead. Otherwise, the carriage can crash into the chuck, or if it contacts the stop, the leadscrew shear pin will break.

Before doing any threading operation, make sure to loosen the feed stop collar so it slides freely on the feed rod and will not interfere with carriage travel.

Micrometer Stop

The micrometer stop allows you to stop the carriage at the same position for repeat cuts, such as when turning up to a shoulder. The micrometer stop includes a graduated dial that allows you to precisely position the stop.

The micrometer stop is only designed to be used when feeding the carriage by hand—it should not be used as a stop for power feed or threading operations, because this lathe is not equipped with an automatic feed clutch.

The carriage stop on this lathe will NOT automatically stop the carriage during power feed or threading operations when the carriage is engaged with the leadscrew! Failure to heed this notice could result in the carriage crashing and causing severe machine or property damage.

Tools Needed	Qty
Hex Wrench 8mm	................................................. 1

To set the micrometer stop:

1.DISCONNECT LATHE FROM POWER!

2.Loosen the cap screws shown in Figure 63, then use the carriage handwheel to position the carriage at the desired stopping point.

Cap Screws

Graduated	Stop Rod
Dial

Figure 63. Micrometer stop.

3.Move the micrometer stop up to the carriage, use the graduated dial to fine tune the position, then retighten the cap screws loosened in Step 2.

4.Verify that tooling will not make contact with the chuck, jaws, or other components.

-48-

SB specifications

The Southbend 1368,SB is a versatile and robust commercial range designed for professional kitchens that demand high performance, reliability, and efficiency. This model is widely recognized for its solid construction and user-friendly features, making it a preferred choice among chefs and restaurant operators.

One of the standout features of the Southbend 1368,SB is its powerful burners. Equipped with six high-output burners, each producing 33,000 BTUs, this range delivers exceptional cooking power, allowing chefs to boil, sauté, and simmer with ease. The burners are designed with heavy-duty cast iron grates that not only provide durability but also ensure optimal heat distribution across the cooking surface, enhancing culinary results.

The range also includes a spacious oven with a capacity of 40,000 BTUs, which is perfect for baking, roasting, and broiling various dishes. The oven features a thermostat that allows for precise temperature control, ensuring that dishes are cooked to perfection every time. Additionally, the oven's interior is made from stainless steel, which offers excellent heat retention and is easy to clean.

Another notable characteristic of the Southbend 1368,SB is its construction. Built with a heavy-duty stainless steel exterior, this range is not only aesthetically pleasing but also resistant to corrosion and wear. The front, sides, and top are all designed for durability, making it suitable for high-traffic kitchen environments.

In terms of technological advancements, the Southbend 1368,SB is equipped with modular components that can be easily customized to meet specific cooking needs. This flexibility allows operators to configure the range for various cooking tasks, accommodating everything from grilling to frying.

Safety is also a significant consideration in the design of the Southbend 1368,SB. The range includes flame failure safety devices that automatically shut off the gas supply in case of a flame-out, providing peace of mind for operators during busy service times.

In summary, the Southbend 1368,SB is a powerful, versatile, and durable commercial range that brings together high-performance cooking capabilities and user-friendly features. With its robust burners, spacious oven, and heavy-duty construction, it is an ideal choice for any professional kitchen looking for reliability and efficiency in their cooking equipment.