Grizzly G4015Z owner manual Table Of Contents

	Table Of Contents
		PAGE
1.	SAFETY
	SAFETY RULES FOR POWER TOOLS	2-3
	ADDITIONAL SAFETY INSTRUCTIONS FOR LATHE/MILLS	4
2.	CIRCUIT REQUIREMENTS
	110V OPERATION	5
	EXTENSION CORDS	5
	GROUNDING	6
3.	INTRODUCTION
	COMMENTARY	7
	UNPACKING	8
	PIECE INVENTORY	8
	LIFTING	9
	CLEAN UP	10
	SITE CONSIDERATIONS	10
4.	IDENTIFICATION
	MACHINE TERMS	11
5.	ASSEMBLY & SETUP
	HANDWHEEL	12
	HAND CRANK	12-13
	LATHE CHUCK	13
	LATHE CHUCK REMOVAL	14-15
	DEAD CENTER	16
	TOOL POST	17
	DRILL CHUCK	18
	DRILL CHUCK REMOVAL	18
	DRILL PRESS MOUNTING	19
	LATHE MOUNTING	19
	MACHINE VISE	20
6.	LATHE CONTROLS
	LATHE SPEEDS	21
	FEED SELECTION	22
	FEED LEVER	22
	HALF NUT	23
	CARRIAGE CONTROLS	23-24
	TAILSTOCK CONTROLS	24

7.DRILL PRESS CONTROLS

	DRILL PRESS SPEEDS	................................................................................................................25-26
	FINE DOWN FEED	26
8.	ADJUSTMENTS
	GIBS	27-28
	HEAD STOCK	28
	TAILSTOCK	29-30
9.	OPERATIONS
	CONTROL PANEL	31
	TEST RUN	32
	READING THE CHARTS	....................................................................................................................33
	FEED RATES	33
	CHANGING GEARS	34-35
	INCH THREADING	36-37
	POWER FEED	38

10.MAINTENANCE

	LUBRICATION	39-40
	BEARING PRELOAD	40
11.	CLOSURE	41
	MACHINE DATA	42
	YOUR NOTES	43
	PARTS BREAKDOWN AND PARTS LISTS	44-57
	WARRANTY AND RETURNS	58