Grizzly G4015Z owner manual Machine Data Sheet

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901

GRIZZLY MODEL G4015Z COMBO LATHE/MILL

Overall Dimensions:
Overall Length		42"
Overall Width		23"
Overall Height		35"
Bed Width		51⁄2"
Spindle Bore		3⁄4"
Lathe, Drill Press and Tailstock Tapers		..............................................#3 Morse Taper
Weight (Net)		440 lbs.
Weight (Shipping)		500 lbs.
Crate Size		40" L x 23" W x 39" H
Footprint		42" x 23"
Lathe Capacity:
Swing Over Bed		161⁄2"
Swing Over Saddle		111⁄2"
Distance Between Centers		19.2''
Spindle		Intrinsic 4" Back Plate
Compound Travel		3''
Cross Slide Travel		41⁄2"
Tailstock Barrel Travel		11⁄2"
Spindle Speeds		185, 330, 405, 535, 680, 955, 1455 R.P.M.
Feed Rate Range		8 @ .002" - .0069"
Thread Range Inch	8-120 TPI in 27 Steps (Gear changes required)
Thread Range Metric		18 @ .2 - 3.0 mm
Lead Screw		7⁄8"-10 TPI
Cross Slide Screw		1⁄2"-10 TPI
Drill Press Capacity: (Measured without Drill Chuck)
Swing		12''
Spindle to Bed		153⁄4"
Spindle Travel		31⁄2"
Spindle to Work Table		10"
Spindle to Center line		93⁄4"
Head Stock Height Adjustment		3"
Range of Speeds		117, 150, 220, 276, 290, 345, 360, 440, 450, 575,
..........................................................................................................		640, 836, 1000, 1300 R.P.M.
Number of Speeds		14
Drill Capacity		7⁄8"
Motor:
Type		TEFC Capacitor Start Induction
Horsepower		3⁄4
Switch		Push Button, Reversing
Phase		Single Phase
Voltage		110V
Amps		8.7
R.P.M		1710
Bearings		Shielded And Lubricated For Life
Features:
..............................................................................................................		4" 3-Jaw Chuck
................................................................................................		Tee Slots in Cross Slide

..........................................................................................................19 Change Gears

....................................................................................................Drill Chuck with Arbor

............................................................................................................2 Dead Centers

Specifications, while deemed accurate, are not guaranteed.

-42- G4015 Lathe/Mill