Apron Gib - There are 2 setscrews that tension the saddle gib. Before making adjustments to the saddle gib, ensure that the front lock lever is loose by turning it counterclockwise. See Figure
30.
It is important the setscrews are tightened even- ly. A slight drag should be detected while turning the hand crank at the end of the lathe.
Figure 30. This bolt locks the apron in place.
Head Stock
The Head Stock can be adjusted up or down to suit height requirements for different workpieces. Figure 31 shows the locking setscrew and lifting mechanism. To adjust the height, loosen the locking setscrew and rotate the lifting levers. When the Head Stock is at the desired height, lock in place with the lever. The Head Stock can be rotated around the column allowing it to be positioned out of the way during lathe operations.
Figure 31. Elevating the Head Stock.
|
|
|
|
|
|
|
|
|
| G4015Z Lathe/Mill | |
|
|