Cisco Systems 815 manual Label/Color Description

Chapter 1 Overview

Figure 1-4 WIC-4ESW

WIC 4ESW

ACT
4x	LNK	ACT
		3x	LNK	ACT
				2x	LNK	ACT
						1x	LNK

Figure 1-5 HWIC-CABLE-D-2

Back Panel Ports and LEDs

95777

HWIC-	CABLE-D-2		DS
		CABLE	US	LINK
			ONLINE	POWER	146788

Table 1-2		Back Panel Connectors
	Connector/Slot		Label/Color	Description
	Ethernet port		10/100	Connects the router to the local Ethernet network. This
			ETHERNET	port autosenses the speed (10 Mbps or 100 Mbps) and
			(yellow)	duplex mode (full- or half-) of the device to which it is
				connected, and then operates at the same speed and in the
				same duplex mode.
	Auxiliary port		AUX	Connects to a modem for remote configuration using
			(black)	Cisco IOS software.
	Console port		CONSOLE	Connects to a terminal or PC for local configuration
			(blue)	using Cisco IOS software.
	WIC-4ESW (WIC 0)		No label	Supports interface card with four 10/100-BASE-TX
				Ethernet switchports. See Figure 1-4.
	HWIC-CABLE-D-2		No label	Supports one Cisco cable WIC. See Figure 1-5.
	(WIC 1)
			Cisco 815 Integrated Services Router Hardware Installation Guide
	OL-9558-01				1-5