Cisco Systems 815 manual LED Label Color Description

Page 33

Chapter 1 Overview

Figure 1-6 Front Panel LEDs

PWR	WIC0 WIC1	ETH
PWR	ACT/CH0 ACT/CH0	ACT
OK	ACT/CH1 ACT/CH1	COL

Front Panel LEDs

65537

Table 1-4		Front Panel LEDs

	LED Label	Color	Description

	PWR	Green	On means that DC power is being supplied to the router.

	OK	Green	On means that the router has successfully booted up and the software is
			functional. This LED blinks during the power-on self-test (POST).
			See the section “OK LED Diagnostics” in Chapter 3,
			“Troubleshooting,” for information on how to use this LED for router
			diagnostics.

	WIC0	N/A	N/A.

	ACT/CH0	Green	Blinks when data is being sent to or received from the port on the card
			in the WIC 0 slot.

			2-port serial cards—Blinks when data is being sent to or received from
			the first port on the 2-port card in the WIC 0 slot.

	ACT/CH1	Green	Remains off.

			2-port serial cards—Blinks when data is being sent to or received from
			the second port on the 2-port card in the WIC 0 slot.

	WIC1	N/A	N/A.

	ACT/CH0	Green	Blinks when data is being sent to or received from the port on the card
			in the WIC 1 slot.

			2-port serial cards—Blinks when data is being sent to or received from
			the first port on the 2-port card in the WIC 1 slot.

	ACT/CH1	Green	Remains off.

			Cisco 815 Integrated Services Router Hardware Installation Guide

	OL-9558-01				1-7
	OL-9558-01				1-7

Image 33

Contents Corporate Headquarters Page Cisco Systems, Inc. All rights reserved Page N T E N T S Installation Vii Installing and Removing a Dimm C-4Viii Organization Audience and ScopeRelated Documentation Conventions Xii Xiii Xiv Page Xvi Xvii Xviii CommandsObtaining Documentation AccessibilityCisco.com XixDocumentation Store in the Cisco Marketplace at this URL Product Documentation DVD Ordering DocumentationDocumentation Feedback Cisco Product Security OverviewXxi Xxii Reporting Security Problems in Cisco ProductsObtaining Technical Assistance Cisco Technical Support & Documentation WebsiteXxiii Submitting a Service Request Definitions of Service Request SeverityXxiv Xxv Obtaining Additional Publications and InformationXxvi Overview Key FeaturesFeature Description Cisco Product Serial Number Location Back Panel Ports and LEDs Back Panel Ports and LEDsLabel/Color Description WIC0 OK Front Panel LEDsLED Label Color Description Types of Memory Router Memory815# show version Amounts of MemoryUnpacking the Router Items Included with the Cisco 815 Integrated Services RouterBefore Installing the Router InstallationConnecting the Router to Your Local Network Installation Connecting the Router to Your Local Network Connecting the Router to the Local Network Connecting the Power Supply Connecting Power to the RouterVerifying Your Installation Connecting a PC Optional Installation ProceduresConnecting the Console Cable to the Router AUX port RJ-45 DB-9-to-DB-25 adapter Console cable Modem Connecting a ModemStacking the Router Assembling Stacking Clip and Fastener Stacking the Router Back View Unstacking the Router Unstacking the RouterOL-9558-01 Contacting Your Cisco Reseller TroubleshootingDetermining the Configuration Register Value Recovering a Lost PasswordConfiguration register is 0x2102 815# Press Return. The following prompt appears Resetting the RouterPrompt changes to the privileged Exec prompt Resetting the Configuration Register Value Resetting the PasswordOK LED Diagnostics Problem SolvingNumber of Blinks Meaning Troubleshooting WICs and CablesExample WIC-4ESW Troubleshooting the Power System Symptom Possible Causes Technical Specifications Operating Specifications Ethernet Cables Cabling Specifications10BASE-T 100BASE-TX Ethernet Network Cabling GuidelinesConsole Cable and Adapter Signal RJ-45 Pin DB-9 Pin DB-25 PinOL-9558-01 Safety Warnings Opening the Chassis Figure C-1 Removing the Chassis Screws Locating Modules Installing and Removing a DimmRelease the latches Remove the Dimm Removing a DimmInsert the Dimm Latches rotate to closed position Installing a DimmScrew Standoff Installing a VPN ModuleFigure C-7 VPN Module Location Figure C-9 Retention Clip Location Figure C-10 Aligning the Retention Clip Center Post Figure C-11 Attaching the Retention Clip to the Motherboard Figure C-12 Securing the Standoff to the Router Motherboard Closing the Chassis Figure C-13 Attaching the Router Cover IN-1 NumericsCIN-2 ETH COL LEDIN-3 Dimm C-4IN-4