Haier 309292L Symbols, Fire, Explosion, and Electric Shock Hazard, Toxic Fluid Hazard

Page 4

Symbols

Symbols

Warning Symbol

Caution Symbol

WARNING

CAUTION

This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions.

This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instruc- tions.

WARNING

Fire, Explosion, and Electric Shock Hazard

Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous condition and result in a fire, explosion, or electric shock.

•Electrostatic equipment must be used only by trained, qualified personnel who understand the requirements in this manual.

•Ground the equipment, all personnel in or close to the spray area, the object being sprayed, and all conductive objects in the spray area. See Grounding, page 12.

•Provide fresh air ventilation to avoid buildup of flammable or toxic vapors when spraying, flushing, or cleaning the gun. Interlock the gun air supply to prevent operation unless venti- lating fans are on. See Ventilate the Spray Booth on page 7.

•Do not flush with the gun electrostatics on. Do not turn on the gun electrostatics until all sol- vent is removed from the system.

•If there is any static sparking while using the equipment, stop spraying immediately. Iden- tify and correct the problem.

•Eliminate all ignition sources such as pilot lights, cigarettes, and static arcs from plastic drop cloths. Do not plug in or unplug power cords or turn lights on or off in the spray area.

•Check gun resistance daily. See Test Gun Resistance on page 18.

•Use cleaning solvents with the highest possible flash point, preferably above ambient temperature.

•Keep the spray area free of debris and rags. Do not store solvent and flammable fluids in the spray area.

•Use only non-sparking tools to clean residue from the booth and hangers.

•Keep a fire extinguisher in the work area.

Toxic Fluid Hazard

Hazardous fluids or toxic fumes can cause a serious injury or death if splashed in the eyes or on the skin, swallowed, or inhaled.

•Know the specific hazards of the fluid you are using. Read the fluid manufacturer’s warn- ings.

•Store hazardous fluid in an approved container. Dispose of the hazardous fluid according to all local, state, and national guidelines.

•Wear appropriate protective clothing, gloves, eyewear, and respirator.

4

309292L

Page 3 Page 5
Image 4
Page 3 Page 5
Contents PRO Xs3 and PRO Xs4 Air Spray Guns Table of Contents List of Models Fire, Explosion, and Electric Shock Hazard SymbolsToxic Fluid Hazard Equipment Misuse Hazard Pressurized Equipment HazardHow the Electrostatic Air Spray Gun Works IntroductionGun Overview Installation Install the SystemVentilate the Spray Booth Flammable or Toxic Vapor HazardTypical Installation Key Connect the Air Line Connect the Exhaust TubeElectric Shock Hazard Supply HoseConnect the Fluid Line Filter the FluidSelect a Fluid Nozzle and Air Cap Orifice SizeHC Conversion Kit 244919 Conversion KitGrounding Check Electrical Grounding Check Gun GroundingCheck Fluid Resistivity Check Fluid ViscosityOperation Low Voltage Adjustment Smart Guns OnlyKV Guns Maintenance Flush the Spray GunHang the gun from its hook, with the nozzle pointing down Electrical Tests Test Gun ResistanceTest Power Supply Resistance Test Power Supply ResistanceTest Electrode Resistance Test Electrode ResistanceTroubleshooting Spray Pattern TroubleshootingGun Operation Troubleshooting See Test Gun Resistance on Electrical TroubleshootingSee Check Fluid Resistivity on Pressure Relief Procedure RepairPrepare the Gun for Service Air Cap/Nozzle Replacement Electrode Replacement Electrode ReplacementFluid Packing Removal Fluid Packing RemovalPacking Rod Repair Packing RodBarrel Installation Barrel RemovalPower Supply Removal and Replacement Power SupplyTurbine Alternator Removal and Replacement Fluid Tube Removal Replacement PRO Xs4 Guns OnlyFan Air Adjustment Valve Repair Fan Air Adjustment ValveFluid Adjustment Valve Repair Air Valve RepairAtomizing Air Restrictor Valve Removal and Replacement ES ON/OFF Valve RepairParts Ref. No Packing Rod Ref. No ES ON/OFF Valve Ref. No Alternator Ref. No Fan Adjustment ValveFluid Tube Model Description Qty Description Qty 51 Ref Ref. No ES ON/OFF Valve Ref. No Packing Rod Part No. Description Qty Part No. Description Qty Air Line Accessories AccessoriesFluid Line Accessories Gun Accessories Miscellaneous AccessoriesTechnical Data Category DataTechnical Data 309292L Graco Information Graco Standard WarrantyToll Free
Top Page Image Contents