Symbols
WARNING
Equipment Misuse Hazard
Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and result in a serious injury.
•This equipment is for professional use only.
•Read all manuals, tags, and labels before operating the equipment.
•Use the equipment only for its intended purpose. If you are uncertain, call your Graco dis- tributor.
•Do not alter or modify equipment. Use only genuine Graco parts and accessories.
•Check the equipment daily. Repair or replace worn or damaged parts immediately.
•Do not exceed the maximum working pressure of the lowest rated system component. Max- imum working air and fluid pressure of this equipment is 100 psi (0.7 MPa, 7.0 bar).
•Use fluids and solvents that are compatible with the equipment wetted parts. See the Tech- nical Data section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.
•Route the hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose Graco hoses to temperatures above 180°F (82°C) or below
•Do not kink or overbend hoses or use hoses to pull equipment.
•Wear hearing protection when operating this equipment.
•Comply with all applicable local, state, and national fire, electrical, and other safety regula- tions.
Pressurized Equipment Hazard
Spray from the gun, hose leaks, or ruptured components can splash fluid in the eyes or on the skin and cause serious injury.
•Do not point the spray gun at anyone or at any part of the body.
•Do not stop or deflect fluid leaks with your hand, body, glove, or rag.
•Follow the Pressure Relief Procedure, page 24, when you stop spraying and before clean- ing, checking, or repairing equipment.
•Check hoses and couplings daily. Replace worn, damaged, or loose parts immediately.
•Tighten all fluid connections before each use.
309292L | 5 |