Graco 261800 specifications Reversible Tip Selection Chart, Understanding Tip Number

Page 16

Understanding Tip Number

The last three digits of tip number (i.e.: 221413) contain information about hole size and fan width on surface when gun is held 12 in. (30.5 cm) from surface being sprayed.

	First digit when doubled
	= approximate	413 tip has
	fan width	413 tip has
	fan width	8-10 in.
		fan width

413 tip has a

0.013 in.

TIA

hole size

Last two digits = tip hole size in thousands of an inch

Getting Started

Reversible Tip Selection Chart

Tip	Fan Width 12 in.
Part		(305 mm) from
No.		surface	Hole Size

221311	6	- 8 in.	0.011 in.
	(152 - 203 mm)		(0.28 mm)

221411	8	- 10 in.	0.011 in.
	(203 - 254 mm)		(0.28 mm)

221313	6	- 8 in.	0.013 in.
	(152 - 203 mm)		(0.33 mm)

221413	8	- 10 in.	0.013 in.
	(203 - 254 mm)		(0.33 mm)

221415	8	- 10 in.	0.015 in.
	(203 - 254 mm)		(0.38 mm)

221515	10 - 12 in.		0.015 in.
	(254 - 305 mm)		(0.38 mm)

Example: For an 8 to 10 in. (203 to 254 mm) fan width and 0.013 (0.33 mm) hole size, order Part No. 221413.

16

312079A

Image 16

Contents Project Painter 5 Airless Sprayer Fire and Explosion Hazard Equipment Misuse Hazard Grounding and Electric Requirements InstallationThermal Overload Component Identification Project PainterE1 M Getting Started Pressure Relief ProcedureTrigger Lock Setup AllControl SettingsHopper Method Primary Spray Method Priming and Flushing Storage Fluid Hopper Method Oil- or Water-based MaterialsPRIME/CLEAN GUN Direct Immersion Setup Alternate Spray Method Priming and Flushing Storage Fluid Direct Immersion Method Install Tip and Guard Adjusting Pressure Spraying TechniquesUnclogging Spray Tip Preventing Excessive Tip WearChoosing the Correct Tip for the Job Tip SelectionSelecting Tip Hole Size CoatingsUnderstanding Tip Number Reversible Tip Selection ChartTip Fan Width 12 Part Mm from Surface Triggering Gun Getting Started With Basic TechniquesAiming Gun Rolling Rolling Techniques Ceilings, Walls and WoodworkShutdown & Cleaning After Hopper Method Applications Relieve pressure,Relatively clear and all Power Flush PRIME/CLEAN GUN and Hose Pail Flushing Pull and hold gun trigger Turn AllControl to Open Turn off garden hose. Close Power Flush attachment Cleaning Roller Short Term Storage StorageLong Term Storage Stowing Sprayer Troubleshooting Problem Cause SolutionTroubleshooting Thermal Overload, Maintenance and Service Caring for SprayerPaint Hoses TipsTechnical Data Graco Standard Warranty For Graco Canada Customers